A good PCB layout for the ATS668LSMTN-T involves keeping the sense lines (VCC, GND, and SENSE) as short as possible, using a ground plane, and minimizing the distance between the IC and the sense resistor. A 4-layer PCB with a dedicated ground plane is recommended.
To ensure accurate current sensing, use a low-impedance sense resistor (e.g., 1 mΩ), keep the sense lines short and away from noise sources, and use a low-noise power supply. Also, ensure the sense resistor is properly soldered and connected to the IC.
The maximum allowable voltage on the VCC pin is 5.5V. Exceeding this voltage may damage the IC. It's recommended to use a voltage regulator or a voltage limiter to ensure the VCC pin voltage remains within the specified range.
To minimize EMI, use a shielded cable for the sense lines, keep the sense lines away from noise sources, and use a common-mode choke or ferrite bead on the sense lines. Also, ensure the PCB layout is designed to minimize radiation and susceptibility to EMI.
The recommended operating temperature range for the ATS668LSMTN-T is -40°C to 125°C. Operating the IC outside this range may affect its performance and reliability.
Trust Checks
This model has been provided by an expert contributor.
Expert Contribution
This model has been verified by system checks.
System Verified
This model has been reviewed by community users.
Community Approved
Sponsored
ATS668LSMTN-T Overview
Use the download button to access the ATS668LSMTN-T schematic symbol, PCB footprint, and 3D model.
To find more CAD model downloads similar to this part, try a partial part number search, like ATS66,
or try a keyword search, such as Other Sensors/Transducers
