Allegro recommends a 4-layer PCB with a solid ground plane on the bottom layer, and a separate layer for the power supply. Keep the sense lines as short as possible and away from noise sources. Use a common mode filter or ferrite bead to reduce EMI.
Calibration involves adjusting the zero-current output voltage (VOUT) to the ideal value (typically 2.5V). Use a precision resistor and a known current source to calibrate the device. Refer to the application note AN296067 for detailed calibration procedures.
The device is rated for operation from -40°C to 150°C (TJ). However, the accuracy and linearity of the current measurement may degrade at extreme temperatures. Ensure proper thermal management and consider derating the device for high-temperature applications.
The ATS699LSN-RSWPH-T is optimized for low-frequency current measurement (up to 100 kHz). For high-frequency applications, consider using a different Allegro device, such as the ACS724, which is designed for high-frequency current sensing.
Use external protection components, such as TVS diodes and current-limiting resistors, to prevent damage from overvoltage and overcurrent conditions. Ensure that the device is operated within the recommended voltage and current ranges.
Trust Checks
No trust score is available for this model.
Trust Score Unavailable
Sponsored
ATS699LSN-RSWPH-T Overview
Use the download button to access the ATS699LSN-RSWPH-T 3D model. You can still request or build the schematic symbol and PCB footprint by using the respective build or request forms on this page.
To find more CAD model downloads similar to this part, try a partial part number search, like ATS69,
or try a keyword search, such as Other Sensors/Transducers
