Delta Electronics recommends a 2-layer or 4-layer PCB with a solid ground plane and a thermal relief pattern under the IC to ensure good heat dissipation. A minimum of 1 oz copper thickness is recommended.
To ensure reliable start-up and shutdown, it's essential to follow the recommended soft-start and shutdown procedures outlined in the datasheet. Additionally, ensure that the input voltage rises and falls slowly (typically 10-20 ms) to prevent inrush currents and voltage spikes.
The maximum allowed capacitance on the output of the AUB0824VH is 220 μF. Exceeding this value may cause instability or oscillations in the output voltage.
While the AUB0824VH is rated for operation up to 85°C, it's essential to consider the derating curves and thermal management guidelines provided in the datasheet to ensure reliable operation in high-temperature environments.
To troubleshoot oscillations or instability issues, check the PCB layout, component selection, and input/output filtering. Ensure that the input voltage is stable, and the output capacitance is within the recommended range. Also, verify that the feedback loop is properly compensated and the switching frequency is within the recommended range.
Trust Checks
No trust score is available for this model.
Trust Score Unavailable
Sponsored
AUB0824VH Overview
Use the download button to access the AUB0824VH 3D model. You can still request or build the schematic symbol and PCB footprint by using the respective build or request forms on this page.
To find more CAD model downloads similar to this part, try a partial part number search, like AUB08,
or try a keyword search, such as Fans/Blowers
