The recommended land pattern for the AVRM0603C120MT150N capacitor is a rectangular pad with a size of 0.65mm x 1.25mm, with a solder mask clearance of 0.1mm. The pad should be centered on the capacitor's termination.
The AVRM0603C120MT150N capacitor is a moisture-sensitive device (MSD) and requires special handling. It should be stored in a dry environment with a relative humidity of 20% or less, and should be soldered within 168 hours of opening the package. If the capacitor is exposed to moisture, it should be baked at 125°C for 24 hours before soldering.
The derating curve for the AVRM0603C120MT150N capacitor is not explicitly stated in the datasheet, but it can be estimated based on the capacitor's temperature coefficient. As a general rule, the capacitor's capacitance decreases by 2-3% per 10°C increase in temperature above 25°C. For example, at 85°C, the capacitance would be approximately 80-85% of the rated value.
The AVRM0603C120MT150N capacitor is designed to meet the vibration requirements of IEC 60068-2-6, which specifies a vibration amplitude of 10mm and a frequency range of 10-2000Hz. However, it's recommended to perform additional testing and validation to ensure the capacitor's performance in the specific vibration environment of your application.
The ESR of the AVRM0603C120MT150N capacitor is not explicitly stated in the datasheet, but it can be estimated based on the capacitor's impedance characteristics. The ESR can be calculated using the following formula: ESR = (Impedance at 100kHz) / (2 * π * Frequency * Capacitance). For example, at 100kHz, the impedance is approximately 10 ohms, so the ESR would be around 0.05 ohms.
Trust Checks
This model has been built in collaboration with the manufacturer.
Manufacturer Collaborated
This model has been verified by system checks.
System Verified
This model has been reviewed by community users.
Community Approved
Sponsored
AVRM0603C120MT150N Overview
Use the download button to access the AVRM0603C120MT150N schematic symbol, PCB footprint, and 3D model.
To find more CAD model downloads similar to this part, try a partial part number search, like AVRM0,
or try a keyword search, such as Non-linear Resistors
About TDK
TDK-Lambda is a global supplier of power supplies and related products. It is a subsidiary of TDK Corporation, a leading electronics company based in Japan. TDK-Lambda specializes in designing and manufacturing a wide range of AC-DC power supplies, DC-DC converters, programmable power supplies, and EMC/EMI filters for various industries and applications.
