Panasonic recommends a PCB layout with a solid ground plane, short and wide traces, and a decoupling capacitor (e.g., 100nF) close to the VCC pin to minimize noise and ensure stable operation.
The AXT380124 has a thermal pad on the bottom, which should be connected to a thermal relief pattern on the PCB. Ensure good thermal conductivity by using a thermal interface material (e.g., thermal tape or thermal grease) and a heat sink if necessary.
Although the datasheet doesn't specify a maximum voltage for the EN pin, it's recommended to keep it within the VCC voltage range (1.8V to 3.6V) to avoid damage or unpredictable behavior.
While the AXT380124 is rated for operation up to 85°C, it's essential to consider the derating of the output current and voltage regulator performance at higher temperatures. Consult Panasonic's application notes for guidance on high-temperature operation.
To minimize EMC issues, use a shielded layout, keep the input and output capacitors close to the device, and ensure a low-impedance path for the power supply lines. Additionally, consider adding EMI filters or ferrite beads to the input and output lines.
Trust Checks
This model has been built in collaboration with the manufacturer.
Manufacturer Collaborated
This model has been verified by system checks.
System Verified
This model has been reviewed by community users.
Community Approved
Sponsored
AXT380124 Overview
Use the download button to access the AXT380124 schematic symbol, PCB footprint, and 3D model.
To find more CAD model downloads similar to this part, try a partial part number search, like AXT38,
or try a keyword search, such as Headers and Edge Type Connectors
