Panasonic recommends a 4-layer PCB with a solid ground plane and a separate power plane for the AXT548124. The device should be placed near the power source, and the input and output capacitors should be placed as close as possible to the device pins.
The AXT548124 is rated for operation from -40°C to 125°C. Ensure proper thermal design, including heat sinks and thermal vias, to maintain a safe operating temperature. Also, consider derating the device's power dissipation at higher temperatures.
Panasonic recommends using a 10uF to 22uF ceramic capacitor with an X7R or X5R dielectric, placed as close as possible to the VIN pin. This helps to filter out noise and ensure stable operation.
The EN pin should be pulled high during power-up to enable the device. During power-down, the EN pin should be pulled low to disable the device. Ensure a smooth power-up and power-down sequence to prevent unwanted oscillations or damage to the device.
The AXT548124 is rated for a maximum output current of 2A. However, the actual output current may be limited by the input voltage, output voltage, and thermal design. Ensure the device is operated within its specified ratings to prevent overheating or damage.
Trust Checks
This model has been built in collaboration with the manufacturer.
Manufacturer Collaborated
This model has been verified by system checks.
System Verified
This model has been reviewed by community users.
Community Approved
Sponsored
AXT548124 Overview
Use the download button to access the AXT548124 schematic symbol and PCB footprint.
To find more CAD model downloads similar to this part, try a partial part number search, like AXT54,
or try a keyword search, such as Headers and Edge Type Connectors
