B82793C0113N201 - TDK

B82793C0113N201 Frequently Asked Questions (FAQs)

• What is the recommended PCB layout for optimal performance?
  TDK recommends a symmetrical PCB layout with a ground plane underneath the inductor to minimize radiation and ensure optimal performance. A minimum of 1.5 mm clearance around the inductor is recommended to prevent electromagnetic interference.
• How does the inductor perform in high-temperature environments?
  The B82793C0113N201 is rated for operation up to 125°C, but its inductance value may decrease by up to 20% at high temperatures. Engineers should consider this derating when designing for high-temperature applications.
• What is the recommended soldering process for this inductor?
  TDK recommends a reflow soldering process with a peak temperature of 260°C for 10-30 seconds. Engineers should ensure that the soldering process does not exceed these parameters to prevent damage to the inductor.
• Can I use this inductor in a high-vibration environment?
  The B82793C0113N201 is designed to withstand vibrations up to 10 G, but engineers should consider additional mechanical fixation or potting to ensure the inductor remains securely in place in high-vibration applications.
• How does the inductor behave in a parallel or series configuration?
  When used in parallel or series configurations, the inductor's behavior can be complex and dependent on the specific application. Engineers should consult TDK's application notes and perform simulations to ensure the desired performance is achieved.