ROHM recommends a 4-layer PCB with a solid ground plane and a separate power plane for the IC. The input and output capacitors should be placed as close as possible to the IC, and the PCB traces should be kept short and wide to minimize inductance and resistance.
To ensure the BA2904WF-E2 operates within its SOA, the input voltage should be limited to 36V, the output current should not exceed 2A, and the junction temperature should be kept below 150°C. Additionally, the IC should be operated within its recommended operating frequency range of 100kHz to 500kHz.
ROHM recommends using a ceramic capacitor with a value of 10uF to 22uF and a voltage rating of 50V or higher. The capacitor should be placed as close as possible to the VIN pin of the IC to minimize inductance and noise.
The BA2904WF-E2 is rated for operation up to 125°C, but its performance and reliability may degrade at high temperatures. If operation above 125°C is required, ROHM recommends using a heat sink or a thermal management system to keep the junction temperature below 150°C.
To troubleshoot issues with the BA2904WF-E2, check the PCB layout and component placement for any errors or omissions. Verify that the input and output capacitors are properly connected and meet the recommended specifications. Also, check the input voltage and current for any anomalies or noise. If the issue persists, consult the ROHM application notes and technical support resources for further guidance.
Trust Checks
This model has been provided by community users.
Community Provided
This model has been verified by system checks.
System Verified
This model has been reviewed by community users.
Community Approved
Sponsored
BA2904WF-E2 Overview
Use the download button to access the BA2904WF-E2 schematic symbol, PCB footprint, and 3D model.
To find more CAD model downloads similar to this part, try a partial part number search, like BA290,
or try a keyword search, such as Operational Amplifiers
Suggested Parts
If you searched for BA2904WF-E2, you might also be interested in these parts:
