Part Image

BD3814FV-E2 - ROHM Semiconductor

Description: 2ch/ 6ch Electronic Volume

Download BD3814FV-E2 Model
Schematic
symbols
Schematic symbol is unavailable for download
PCB
footprints
PCB footprint is unavailable for download
3D
models
3D model is unavailable for download
3D Models
BD3814FV-E2 - ROHM Semiconductor  - 3D model
click to zoom
Note! To download footprints and symbols, use the build and request forms below

Build

Launch Build Wizard
Build Wizard not available for this package category!

Request (48 hours)

BD3814FV-E2 Details

  • Manufacturer Part Number:

    BD3814FV-E2

  • Pbfree Code:

    Yes

  • Rohs Code:

    Yes

  • Part Life Cycle Code:

    Obsolete

  • Part Package Code:

    SSOP

  • Pin Count:

    40

  • Similar Group:

    SA00101611541040

  • ECCN Code:

    EAR99

  • HTS Code:

    8542.39.00.60

  • Manufacturer:

    ROHM Semiconductor

  • YTEOL:

    0

  • Channel Separation:

    95 dB

  • Consumer IC Type:

    TONE CONTROL CIRCUIT

  • Harmonic Distortion:

    0.001%

  • JESD-30 Code:

    R-PDSO-G40

  • Length:

    13.6 mm

  • Number of Bands:

    2

  • Number of Channels:

    6

  • Number of Functions:

    1

  • Number of Terminals:

    40

  • Operating Temperature-Max:

    75 °C

  • Operating Temperature-Min:

    -20 °C

  • Package Body Material:

    PLASTIC/EPOXY

  • Package Code:

    SSOP

  • Package Equivalence Code:

    SSOP40,.3

  • Package Shape:

    RECTANGULAR

  • Package Style:

    SMALL OUTLINE, SHRINK PITCH

  • Qualification Status:

    Not Qualified

  • Seated Height-Max:

    1.9 mm

  • Supply Current-Max:

    17 mA

  • Supply Voltage-Max (Vsup):

    7.3 V

  • Supply Voltage-Min (Vsup):

    5 V

  • Surface Mount:

    YES

  • Technology:

    BICMOS

  • Temperature Grade:

    COMMERCIAL EXTENDED

  • Terminal Form:

    GULL WING

  • Terminal Pitch:

    0.65 mm

  • Terminal Position:

    DUAL

  • Width:

    5.4 mm

BD3814FV-E2 Frequently Asked Questions (FAQs)

  • ROHM recommends a thermal pad on the bottom of the package, connected to a large copper area on the PCB to dissipate heat efficiently. A minimum of 2oz copper thickness is recommended, and the thermal pad should be connected to a ground plane or a dedicated heat sink.
  • To ensure stable operation with a high-impedance input source, add a capacitor (e.g., 10nF to 100nF) between the input pin and the GND pin to reduce noise and oscillation. Additionally, consider adding a series resistor (e.g., 1kΩ to 10kΩ) to the input pin to limit the input current.
  • The maximum allowed voltage on the EN (enable) pin is VCC + 0.3V. Exceeding this voltage may cause damage to the device. It is recommended to use a voltage limiter or a voltage divider to ensure the EN pin voltage remains within the specified range.
  • The BD3814FV-E2 is rated for operation up to 125°C. However, the device's performance and reliability may degrade at high temperatures. It is recommended to derate the device's power dissipation and consider using a heat sink or thermal management system to maintain a safe operating temperature.
  • To prevent latch-up during power-on or power-off transitions, ensure that the power supply voltage (VCC) rises and falls slowly (e.g., < 10ms) and that the input voltage (VIN) is within the specified range. Additionally, consider adding a soft-start circuit or a voltage supervisor to control the power-on sequence.

Trust Checks

No trust score is available for this model.
Trust Score Unavailable
Sponsored

BD3814FV-E2 Overview

Use the download button to access the BD3814FV-E2 3D model. You can still request or build the schematic symbol and PCB footprint by using the respective build or request forms on this page.
To find more CAD model downloads similar to this part, try a partial part number search, like BD381, or try a keyword search, such as Audio Control ICs

Parts related to BD3814FV-E2

Showing 0 results

Select Package Category

Package Categories

Datasheet PDF Preview