Part Image

BD5291G-GTL - ROHM Semiconductor

Description: Operational Amplifiers - Op Amps ICS, OP AMP FOR SENSORS

Download BD5291G-GTL Model
Schematic
symbols
Schematic symbol is unavailable for download
PCB
footprints
PCB footprint is unavailable for download
3D
models
3D model is unavailable for download
PCB Footprints
BD5291G-GTL - ROHM Semiconductor PCB footprint - SOT23 (5-Pin) - SOT23 (5-Pin) - SSOP5
click to zoom
3D Models
BD5291G-GTL - ROHM Semiconductor  - 3D model - SOT23 (5-Pin) - SSOP5
click to zoom

BD5291G-GTL Details

  • Manufacturer Part Number:

    BD5291G-GTL

  • Pbfree Code:

    Yes

  • Rohs Code:

    Yes

  • Part Life Cycle Code:

    Active

  • ECCN Code:

    EAR99

  • HTS Code:

    8542.33.00.01

  • Manufacturer:

    ROHM Semiconductor

  • Amplifier Type:

    OPERATIONAL AMPLIFIER

BD5291G-GTL Frequently Asked Questions (FAQs)

  • A recommended PCB layout for optimal thermal performance would be to have a large copper area on the bottom layer connected to the thermal pad of the IC, and to use thermal vias to dissipate heat to the top layer. Additionally, it's recommended to have a solid ground plane on the top layer to reduce thermal resistance.
  • To ensure stable operation with a high-ESR output capacitor, it's recommended to add a small ceramic capacitor (e.g. 10nF) in parallel with the output capacitor to reduce the overall ESR. Additionally, the output capacitor should be placed close to the IC to minimize parasitic inductance.
  • The maximum allowed voltage on the EN pin is 6V. Exceeding this voltage may damage the IC. It's recommended to use a voltage divider or a level shifter if the enable signal is coming from a higher voltage domain.
  • The output voltage ripple can be calculated using the following formula: ΔVout = (Iout * ESR) / (fsw * Cout), where Iout is the output current, ESR is the equivalent series resistance of the output capacitor, fsw is the switching frequency, and Cout is the output capacitance.
  • The recommended input capacitor type is a ceramic capacitor with a value of 10uF to 22uF. The capacitor should be placed close to the VIN pin to minimize parasitic inductance and ensure stable operation.

Trust Checks

This model has been provided by community users.
Community Provided
This model has been verified by system checks.
System Verified
This model has been reviewed by community users.
Community Approved
Sponsored

BD5291G-GTL Overview

Use the download button to access the BD5291G-GTL schematic symbol, PCB footprint, and 3D model.
To find more CAD model downloads similar to this part, try a partial part number search, like BD529, or try a keyword search, such as Operational Amplifiers

Parts related to BD5291G-GTL

Showing 0 results