A thermal pad is recommended under the IC to improve heat dissipation. A minimum of 2oz copper thickness and a thermal relief pattern are also recommended.
Ensure that the input voltage is within the recommended range, and that the output capacitor is of sufficient value and type (e.g. X5R or X7R ceramic). Also, ensure that the feedback resistors are of low tolerance and that the feedback network is properly compensated.
The maximum allowable ripple voltage on the input is 1Vp-p. Exceeding this may affect the regulator's stability and output voltage regulation.
While it's possible to use a different inductor value, it's not recommended as it may affect the regulator's stability and output voltage regulation. The recommended inductor value is optimized for the specific application.
Implement overcurrent protection (OCP) and overtemperature protection (OTP) circuits to prevent damage to the device. The BD94062F-E2 has built-in OCP and OTP, but external protection circuits can provide additional protection.
Trust Checks
No trust score is available for this model.
Trust Score Unavailable
Sponsored
BD94062F-E2 Overview
Use the download button to access the BD94062F-E2 3D model. You can still request or build the schematic symbol and PCB footprint by using the respective build or request forms on this page.
To find more CAD model downloads similar to this part, try a partial part number search, like BD940,
or try a keyword search, such as Display Drivers
