Please enter a minimum 3 letters or numbers
Technical Content
Part Image

BFCN-7350+ - Mini-Circuits

Description: Signal Conditioning BANDPASS FLTR / SURF MT / RoHS

Download BFCN-7350+ Model
Schematic
symbols
Schematic symbol is unavailable for download
PCB
footprints
PCB footprint is unavailable for download
3D
models
3D model is unavailable for download
Send part feedback
Symbol
BFCN-7350+ - Mini-Circuits - PCB symbol
click to zoom
PCB Footprints
BFCN-7350+ - Mini-Circuits PCB footprint - Other - Other - BFCN-7350+-1
click to zoom
3D Models
BFCN-7350+ - Mini-Circuits - 3D model - Other - BFCN-7350+-1
click to zoom

BFCN-7350+ Details

  • Manufacturer Part Number:

    BFCN-7350+

  • Rohs Code:

    Yes

  • Part Life Cycle Code:

    Active

  • Package Description:

    ROHS COMPLIANT, HERMETIC SEALED, CERAMIC, CASE FV1206-4, 4 PIN

  • ECCN Code:

    EAR99

  • Manufacturer:

    Mini-Circuits

  • YTEOL:

    6.79

  • Attenuation Frequency (+/- delta f)-Max:

    1350000 kHz

  • Attenuation Frequency (+/- delta f)-Min:

    850000 kHz

  • Attenuation@Freq-Max:

    15 dB

  • Attenuation@Freq-Min:

    25 dB

  • Average Input Power:

    2 W

  • Center or Cutoff Frequency (fo/fc):

    7350 MHz

  • Filter Type:

    CERAMIC BPF

  • Height:

    0.94 mm

  • Input/Output Impedance:

    50 OHM

  • Insertion Loss-Max:

    3.5 dB

  • Length:

    3.2 mm

  • Mounting Type:

    SURFACE MOUNT

  • Number of Terminals:

    4

  • Operating Temperature-Max:

    100 °C

  • Operating Temperature-Min:

    -55 °C

  • VSWR:

    1.3

  • Width:

    1.6 mm

BFCN-7350+ Frequently Asked Questions (FAQs)

  • Mini-Circuits recommends a 4-layer PCB with a solid ground plane on the bottom layer, and a microstrip line on the top layer with a 50-ohm impedance. The device should be placed near the edge of the board to minimize radiation losses.
  • The device has a thermal pad on the bottom that should be connected to a heat sink or a thermal ground plane on the PCB. Ensure good thermal conductivity between the device and the heat sink/thermal ground plane.
  • The maximum input power is not explicitly stated in the datasheet, but Mini-Circuits recommends limiting the input power to 20 dBm (100 mW) to ensure reliable operation and prevent damage to the device.
  • Yes, the BFCN-7350+ can be used in a push-pull configuration, but it's essential to ensure that the two devices are properly matched and biased to achieve optimal performance.
  • The typical noise figure of the BFCN-7350+ is around 3.5 dB, but this can vary depending on the specific application, operating frequency, and bias conditions.

Trust Checks

This model has been provided by community users.
Community Provided
This model has been verified by system checks.
System Verified
This model has been reviewed by community users.
Community Approved
Sponsored

BFCN-7350+ Overview

Use the download button to access the BFCN-7350+ schematic symbol, PCB footprint, and 3D model.
To find more CAD model downloads similar to this part, try a partial part number search, like BFCN-, or try a keyword search, such as Ceramic Filters

About Mini-Circuits

Mini-Circuits is a global leader in the design, manufacturing, and distribution of RF and microwave components and systems. The company's product portfolio includes a vast array of components such as amplifiers, mixers, splitters, couplers, filters, switches, and attenuators, among others. These components cover frequency ranges from DC to 65 GHz and beyond, serving applications in wireless communication, satellite communication, radar systems, test and measurement equipment, medical devices, and more.

Parts related to BFCN-7350+

Showing 0 results

Part Image

← Prev Next →
About Us Contact Us Terms of Service Do not sell or share my personal information Privacy Policy Digital Services Act Library Loader Twitter LinkedIn

All content Copyright © 2020, Supplyframe.com. All rights reserved. Back to top ↑