BLE32SN120BH1L - Murata Electronics

BLE32SN120BH1L Frequently Asked Questions (FAQs)

• What is the recommended antenna design for optimal performance?
  Murata recommends using a 15mm x 15mm ceramic antenna or a 25mm x 10mm PCB antenna with a 50Ω impedance. The antenna should be placed at least 10mm away from any metal components or shields.
• How do I configure the module for low power consumption?
  To minimize power consumption, set the module to sleep mode when not transmitting or receiving data. Use the 'sleep' command to put the module in low power mode. Additionally, adjust the transmission power and data rate to the minimum required for your application.
• What is the maximum operating temperature range for the module?
  The BLE32SN120BH1L module is rated for operation between -40°C to 85°C. However, it's recommended to operate the module within the range of 0°C to 60°C for optimal performance and reliability.
• Can I use the module with a non-compliant Bluetooth Low Energy (BLE) device?
  No, the BLE32SN120BH1L module is designed to work with BLE-compliant devices only. Using it with a non-compliant device may result in connectivity issues or failure to establish a connection.
• What is the maximum data transfer rate supported by the module?
  The BLE32SN120BH1L module supports a maximum data transfer rate of 2 Mbps. However, the actual data transfer rate may be lower depending on the specific application and environmental conditions.