Part Image

BM1R00147F-E2 - ROHM Semiconductor

Description: High Efficiency and Low Standby Power, CCM corresponding Secondary Side Synchronous Rectification Controller IC

Download BM1R00147F-E2 Model
Schematic
symbols
Schematic symbol is unavailable for download
PCB
footprints
PCB footprint is unavailable for download
3D
models
3D model is unavailable for download
PCB Footprints
BM1R00147F-E2 - ROHM Semiconductor PCB footprint - Small Outline Packages - Small Outline Packages - SOP8-1
click to zoom
3D Models
BM1R00147F-E2 - ROHM Semiconductor  - 3D model - Small Outline Packages - SOP8-1
click to zoom

BM1R00147F-E2 Details

  • Manufacturer Part Number:

    BM1R00147F-E2

  • Rohs Code:

    Yes

  • Part Life Cycle Code:

    Active

  • Country Of Origin:

    Philippines

  • HTS Code:

    8542.39.00.01

  • Date Of Intro:

    2016-06-03

  • Manufacturer:

    ROHM Semiconductor

  • YTEOL:

    10

  • Analog IC - Other Type:

    ANALOG CIRCUIT

BM1R00147F-E2 Frequently Asked Questions (FAQs)

  • ROHM recommends a thermal pad on the bottom of the package, connected to a large copper area on the PCB to dissipate heat efficiently. A minimum of 2oz copper thickness is recommended.
  • ROHM recommends following the derating guidelines in the datasheet, using a heat sink if necessary, and ensuring good airflow around the device. Additionally, consider using a thermistor or thermal monitoring IC to monitor the temperature.
  • Although not explicitly stated in the datasheet, ROHM recommends keeping the EN pin voltage within the VCC range (i.e., 2.5V to 5.5V) to ensure proper operation and prevent damage.
  • Yes, the BM1R00147F-E2 is suitable for battery-powered applications due to its low quiescent current (IQ) and low dropout voltage (VDO). However, consider the device's power consumption and battery life requirements in your design.
  • ROHM recommends using a low-ESR ceramic capacitor (e.g., X5R or X7R) with a value between 1uF to 10uF, depending on the output voltage and load requirements. A larger capacitor value may be needed for higher output currents.

Trust Checks

This model has been built in collaboration with the manufacturer.
Manufacturer Collaborated
This model has been verified by system checks.
System Verified
This model has been reviewed by community users.
Community Approved
Sponsored

BM1R00147F-E2 Overview

Use the download button to access the BM1R00147F-E2 schematic symbol, PCB footprint, and 3D model.
To find more CAD model downloads similar to this part, try a partial part number search, like BM1R0, or try a keyword search, such as Other Signal Circuits

Parts related to BM1R00147F-E2

Showing 0 results