ROHM recommends a thermal pad on the bottom of the package, connected to a large copper area on the PCB to dissipate heat efficiently. A minimum of 2oz copper thickness is recommended.
ROHM recommends following the derating guidelines in the datasheet, ensuring proper thermal design, and using a heat sink if necessary. Additionally, consider using a thermistor or thermal sensor to monitor the device temperature.
Although the datasheet specifies the recommended operating voltage range, it's essential to note that the absolute maximum rating for the input pins is 6V. Exceeding this voltage may cause permanent damage to the device.
While the BS2101F-E2 is designed for low-frequency applications, it can be used in high-frequency switching applications with proper design considerations. However, ROHM recommends consulting with their application engineers to ensure the device meets the specific requirements.
ROHM recommends following standard ESD handling procedures, such as using an ESD wrist strap, mat, or workstation, and ensuring that all equipment and tools are properly grounded. Additionally, consider using ESD protection devices or diodes on the PCB.
Trust Checks
This model has been provided by community users.
Community Provided
This model has been verified by system checks.
System Verified
This model has been reviewed by community users.
Community Approved
Sponsored
BS2101F-E2 Overview
Use the download button to access the BS2101F-E2 schematic symbol, PCB footprint, and 3D model.
To find more CAD model downloads similar to this part, try a partial part number search, like BS210,
or try a keyword search, such as MOSFET Drivers
Suggested Parts
If you searched for BS2101F-E2, you might also be interested in these parts:
