Infineon recommends a 2-layer or 4-layer PCB with a thermal via array under the device to ensure good thermal conductivity. A minimum of 10 thermal vias with a diameter of 0.3 mm is recommended.
To ensure EMC, Infineon recommends using a shielded cable for the bus lines, keeping the bus lines as short as possible, and using a common mode choke or ferrite bead to filter out electromagnetic interference.
The recommended operating voltage range for BTT61002ERAXUMA1 is 12 V to 24 V, with a maximum voltage of 27 V for short-term transients.
Infineon recommends using a voltage supervisor or a power supply with built-in overvoltage and undervoltage protection to prevent damage to the device.
The maximum allowed junction temperature for BTT61002ERAXUMA1 is 150°C, with a recommended operating temperature range of -40°C to 125°C.
Trust Checks
No trust score is available for this model.
Trust Score Unavailable
Sponsored
BTT61002ERAXUMA1 Overview
Use the download button to access the BTT61002ERAXUMA1 3D model. You can still request or build the schematic symbol and PCB footprint by using the respective build or request forms on this page.
To find more CAD model downloads similar to this part, try a partial part number search, like BTT61,
or try a keyword search, such as Peripheral Drivers
