The recommended operating voltage range for the BU4011B is 2.7V to 5.5V, although it can operate up to 6.5V with reduced performance.
To ensure the internal oscillator is stable, use a 10kΩ to 100kΩ resistor between the OSCIN pin and VCC, and a 10pF to 100pF capacitor between the OSCIN pin and GND.
The BU4011B supports a maximum clock frequency of 4MHz, although it can be overclocked up to 8MHz with reduced performance and increased power consumption.
The BU4011B's I/O ports are configured as inputs or outputs using the DDR (Data Direction Register) and PORT registers. Set the corresponding bit in the DDR register to 1 for output or 0 for input, and then write to the PORT register to set the output value or read from it to get the input value.
The watchdog timer (WDT) is a safety feature that resets the microcontroller if it fails to respond within a specified time period, typically due to a software or hardware fault. The WDT can be enabled or disabled using the WDTCSR register.
Trust Checks
This model has been provided by community users.
Community Provided
This model has been verified by system checks.
System Verified
This model has been reviewed by community users.
Community Approved
Sponsored
BU4011B Overview
Use the download button to access the BU4011B schematic symbol, PCB footprint, and 3D model.
To find more CAD model downloads similar to this part, try a partial part number search, like BU401,
or try a keyword search, such as Gates