IP 67, IP 68/60, IP69K, SHORT CIRCUIT PROTECTION, REVERSE POLARITY PROTECTION, TRANSIENTS PROTECTION
Body Height:
85 mm
Body Length or Diameter:
18 mm
Housing:
PBT, 30% GLASS REINFORCED
Measurement Range-Max (mm):
12 mm
Mounting Feature:
NON FLUSH MOUNT
Operating Current-Max:
200 mA
Operating Temperature-Max:
85 °C
Operating Temperature-Min:
-30 °C
Output Type:
PNP
Package Shape/Style:
CYLINDRICAL
Response Time:
10000 µs
Sensors/Transducers Type:
PROXIMITY SENSOR,CAPACITIVE
Supply Voltage-Max:
40 V
Supply Voltage-Min:
10 V
Surface Mount:
NO
Termination Type:
PLUG
CA18CAN12PAM1 Frequently Asked Questions (FAQs)
Carlo Gavazzi recommends following a 4-layer PCB stack-up with a dedicated ground plane, and keeping the CAN bus traces as short as possible, with a maximum length of 10cm. Additionally, it's recommended to use a common mode choke and decoupling capacitors to filter out noise and ensure signal integrity.
To configure the CA18CAN12PAM1 for use in a noisy industrial environment, Carlo Gavazzi recommends using a shielded cable, ensuring proper grounding and earthing, and implementing noise filtering using common mode chokes and capacitors. Additionally, setting the CAN bus termination resistors to 120 ohms and using a bus biasing voltage of 2.5V can help improve noise immunity.
The CA18CAN12PAM1 supports a maximum cable length of 40 meters, assuming a cable with a characteristic impedance of 120 ohms and a propagation delay of 5ns/m. However, the actual cable length may vary depending on the specific application and environment.
Yes, the CA18CAN12PAM1 can be used in a redundant CAN bus system. Carlo Gavazzi recommends using two separate CAN bus lines, each with its own CA18CAN12PAM1 transceiver, and implementing a redundancy protocol to ensure seamless communication in case of a failure.
The CA18CAN12PAM1 has an operating temperature range of -40°C to 125°C, making it suitable for use in a wide range of industrial and automotive applications.
Trust Checks
No trust score is available for this model.
Trust Score Unavailable
Sponsored
CA18CAN12PAM1 Overview
Use the download button to access the CA18CAN12PAM1 3D model. You can still request or build the schematic symbol and PCB footprint by using the respective build or request forms on this page.
To find more CAD model downloads similar to this part, try a partial part number search, like CA18C,
or try a keyword search, such as Proximity Sensors
