Part Image

CAT24C16YI-GT3 - onsemi

Description: Supports Standard and Fast I2C Protocol; 1.7 V to 5.5 V Supply Voltage Range; 16-Byte Page Write Buffer; Hardware Write Protection for Entire Memory; Schmitt Triggers and Noise Suppression Filters on I2C Bus Inputs (SCL and SDA); Low Power CMOS Technology; More than 1,000,000 Program/Erase Cycles; 100 Year Data Retention; Industrial Temperature Range; 8-lead SOIC and TSSOP, WLCSP 4 and 5-ball, 8-pad UDFN and 5-lead TSOT-23 packages; These Devices are Pb-Free, Halogen Free/BFR Free, and RoHS Compliant

Download CAT24C16YI-GT3 Model
Schematic
symbols
Schematic symbol is unavailable for download
PCB
footprints
PCB footprint is unavailable for download
3D
models
3D model is unavailable for download
3D Models
CAT24C16YI-GT3 - onsemi  - 3D model
click to zoom
Note! To download footprints and symbols, use the build and request forms below

Build

Launch Build Wizard
Build Wizard not available for this package category!

Request (48 hours)

CAT24C16YI-GT3 Details

  • Manufacturer Part Number:

    CAT24C16YI-GT3

  • Brand Name:

    onsemi

  • Pbfree Code:

    Yes

  • Rohs Code:

    Yes

  • Part Life Cycle Code:

    Active

  • Part Package Code:

    TSSOP8, 4.4x3

  • Package Description:

    TSSOP, TSSOP8,.25

  • Pin Count:

    8

  • Manufacturer Package Code:

    948AL

  • Reach Compliance Code:

    Compliant

  • Country Of Origin:

    Thailand

  • ECCN Code:

    EAR99

  • HTS Code:

    8542.32.00.51

  • Factory Lead Time:

    14 Weeks

  • Manufacturer:

    onsemi

  • YTEOL:

    5

  • Clock Frequency-Max (fCLK):

    0.4 MHz

  • Data Retention Time-Min:

    100

  • Endurance:

    1000000 Write/Erase Cycles

  • I2C Control Byte:

    1010MMMR

  • JESD-30 Code:

    R-PDSO-G8

  • JESD-609 Code:

    e4

  • Length:

    4.4 mm

  • Memory Density:

    16384 bit

  • Memory IC Type:

    EEPROM

  • Memory Width:

    1

  • Moisture Sensitivity Level:

    1

  • Number of Functions:

    1

  • Number of Terminals:

    8

  • Number of Words:

    16384 words

  • Number of Words Code:

    16000

  • Operating Mode:

    SYNCHRONOUS

  • Operating Temperature-Max:

    85 °C

  • Operating Temperature-Min:

    -40 °C

  • Organization:

    16KX1

  • Package Body Material:

    PLASTIC/EPOXY

  • Package Code:

    TSSOP

  • Package Equivalence Code:

    TSSOP8,.25

  • Package Shape:

    RECTANGULAR

  • Package Style:

    SMALL OUTLINE, THIN PROFILE, SHRINK PITCH

  • Parallel/Serial:

    SERIAL

  • Peak Reflow Temperature (Cel):

    260

  • Qualification Status:

    Not Qualified

  • Seated Height-Max:

    1.2 mm

  • Serial Bus Type:

    I2C

  • Standby Current-Max:

    0.000001 A

  • Supply Current-Max:

    0.002 mA

  • Supply Voltage-Max (Vsup):

    5.5 V

  • Supply Voltage-Min (Vsup):

    1.7 V

  • Supply Voltage-Nom (Vsup):

    5 V

  • Surface Mount:

    YES

  • Technology:

    CMOS

  • Temperature Grade:

    INDUSTRIAL

  • Terminal Finish:

    Nickel/Palladium/Gold (Ni/Pd/Au)

  • Terminal Form:

    GULL WING

  • Terminal Pitch:

    0.65 mm

  • Terminal Position:

    DUAL

  • Time@Peak Reflow Temperature-Max (s):

    30

  • Width:

    3 mm

  • Write Cycle Time-Max (tWC):

    5 ms

  • Write Protection:

    HARDWARE

CAT24C16YI-GT3 Frequently Asked Questions (FAQs)

  • The CAT24C16YI-GT3 has a minimum of 1 million write cycles, but the actual number of write cycles may vary depending on the usage and operating conditions.
  • The CAT24C16YI-GT3 uses a page write buffer to handle page writes. The device can write up to 16 bytes of data in a single page write operation.
  • The WP (Write Protect) pin is used to prevent accidental writes to the device. When the WP pin is tied low, the device is in a write-protected state, and any attempt to write to the device will be ignored.
  • Yes, the CAT24C16YI-GT3 is a 5V-compatible device and can be used in a 5V system. However, the device's operating voltage range is 1.7V to 5.5V, so it can also be used in 3.3V or other voltage systems.
  • The CAT24C16YI-GT3 has a built-in power-on reset (POR) circuit that resets the device to a known state when power is applied. The POR circuit ensures that the device is in a valid state after power-up.

Trust Checks

No trust score is available for this model.
Trust Score Unavailable
Sponsored

CAT24C16YI-GT3 Overview

Use the download button to access the CAT24C16YI-GT3 3D model. You can still request or build the schematic symbol and PCB footprint by using the respective build or request forms on this page.
To find more CAD model downloads similar to this part, try a partial part number search, like CAT24, or try a keyword search, such as EEPROMs

Parts related to CAT24C16YI-GT3

Showing 0 results

Select Package Category

Package Categories

Datasheet PDF Preview

CAT24C16YI-GT3 Alternates

Showing results

Image Part Number Model
Part Image CAT24C16YI-T3 onsemi

128X16 I2C/2-WIRE SERIAL EEPROM, PDSO8, 0.150 INCH, HALOGEN FREE, BFR FREE AND ROHS COMPLIANT, MS-012, SOIC-8

Part Image CAT24C16YI-GT3 Rochester Electronics LLC

2KX8 I2C/2-WIRE SERIAL EEPROM, PDSO8, GREEN, MO-153, TSSOP-8

Part Image CAT24C16YE-G onsemi

EEPROM, 16KX1, Serial, CMOS, PDSO8

Part Image CAT24C16YE onsemi

EEPROM, 16KX1, Serial, CMOS, PDSO8

Part Image CAT24C16YE-T3 onsemi

EEPROM, 128X16, Serial, CMOS, PDSO8

For a full list of alternate parts for CAT24C16YI-GT3, check out Findchips.com