Part Image

CAT25010VI-GT3 - onsemi

Description: 20 MHz (5 V) SPI Compatible; 1.8 V to 5.5 V Supply Voltage Range; SPI Modes (0,0 and 1,1); 16-byte Page Write Buffer; Self-timed Write Cycle; Hardware and Software Protection; Block Write Protection - Protect 1/4, 1/2 or Entire EEPROM Array; Low Power CMOS Tchnology; 8-lead SOIC and TSSOP and 8-pad UDFN packages; Industrial Temperature Range; 100 year Data Retention; 1,000,000 Program/Erase Cycles; These Devices are Pb-Free, Halogen Free/BFR Free and RoHS Compliant

Download CAT25010VI-GT3 Model
Schematic
symbols
Schematic symbol is unavailable for download
PCB
footprints
PCB footprint is unavailable for download
3D
models
3D model is unavailable for download
PCB Footprints
CAT25010VI-GT3 - onsemi PCB footprint - Small Outline Packages - Small Outline Packages - SOIC 8, 150 mils
click to zoom
3D Models
CAT25010VI-GT3 - onsemi  - 3D model - Small Outline Packages - SOIC 8, 150 mils
click to zoom

CAT25010VI-GT3 Details

  • Manufacturer Part Number:

    CAT25010VI-GT3

  • Brand Name:

    onsemi

  • Pbfree Code:

    Yes

  • Rohs Code:

    Yes

  • Part Life Cycle Code:

    Active

  • Part Package Code:

    SOIC 8, 150 mils

  • Package Description:

    MS-012, SOIC-8

  • Pin Count:

    8

  • Manufacturer Package Code:

    751BD

  • Country Of Origin:

    Philippines

  • ECCN Code:

    EAR99

  • HTS Code:

    8542.32.00.51

  • Factory Lead Time:

    20 Weeks

  • Manufacturer:

    onsemi

  • YTEOL:

    5

  • Clock Frequency-Max (fCLK):

    20 MHz

  • Data Retention Time-Min:

    100

  • Endurance:

    1000000 Write/Erase Cycles

  • JESD-30 Code:

    R-PDSO-G8

  • JESD-609 Code:

    e4

  • Length:

    4.9 mm

  • Memory Density:

    1024 bit

  • Memory IC Type:

    EEPROM

  • Memory Width:

    8

  • Moisture Sensitivity Level:

    1

  • Number of Functions:

    1

  • Number of Terminals:

    8

  • Number of Words:

    128 words

  • Number of Words Code:

    128

  • Operating Mode:

    SYNCHRONOUS

  • Operating Temperature-Max:

    85 °C

  • Operating Temperature-Min:

    -40 °C

  • Organization:

    128X8

  • Package Body Material:

    PLASTIC/EPOXY

  • Package Code:

    SOP

  • Package Equivalence Code:

    SOP8,.25

  • Package Shape:

    RECTANGULAR

  • Package Style:

    SMALL OUTLINE

  • Parallel/Serial:

    SERIAL

  • Peak Reflow Temperature (Cel):

    260

  • Qualification Status:

    Not Qualified

  • Seated Height-Max:

    1.75 mm

  • Serial Bus Type:

    SPI

  • Standby Current-Max:

    0.000002 A

  • Supply Current-Max:

    0.002 mA

  • Supply Voltage-Max (Vsup):

    5.5 V

  • Supply Voltage-Min (Vsup):

    1.8 V

  • Supply Voltage-Nom (Vsup):

    5 V

  • Surface Mount:

    YES

  • Technology:

    CMOS

  • Temperature Grade:

    INDUSTRIAL

  • Terminal Finish:

    Nickel/Palladium/Gold (Ni/Pd/Au)

  • Terminal Form:

    GULL WING

  • Terminal Pitch:

    1.27 mm

  • Terminal Position:

    DUAL

  • Time@Peak Reflow Temperature-Max (s):

    30

  • Width:

    3.9 mm

  • Write Cycle Time-Max (tWC):

    5 ms

  • Write Protection:

    HARDWARE/SOFTWARE

CAT25010VI-GT3 Frequently Asked Questions (FAQs)

  • A good PCB layout for the CAT25010VI-GT3 involves keeping the power and ground pins as close as possible to the device, using a solid ground plane, and minimizing the length of the traces connected to the VCC and GND pins. Additionally, it's recommended to use a decoupling capacitor between VCC and GND to filter out noise.
  • To ensure proper power-up and initialization, it's recommended to follow a power-up sequence where VCC is applied before the input signals. The device should be powered up slowly (dv/dt < 10 mV/μs) to prevent latch-up. Additionally, the WP pin should be tied to VCC or GND to prevent accidental writes during power-up.
  • The maximum operating frequency of the CAT25010VI-GT3 is 10 MHz. Operating the device at higher frequencies can increase power consumption, so it's recommended to operate the device at the lowest frequency necessary for the application to minimize power consumption.
  • When writing to the CAT25010VI-GT3, it's recommended to implement a retry mechanism to handle errors. If a write operation fails, the device should be reset and the write operation retried. The number of retries should be limited to prevent infinite loops.
  • The CAT25010VI-GT3 uses a serial interface to store and retrieve data. It's recommended to use a serial protocol such as SPI or I2C to communicate with the device. Data should be stored and retrieved in a sequential manner to ensure data integrity.

Trust Checks

This model has been built in collaboration with the manufacturer.
Manufacturer Collaborated
This model has been verified by system checks.
System Verified
This model has been reviewed by community users.
Community Approved
Sponsored

CAT25010VI-GT3 Overview

Use the download button to access the CAT25010VI-GT3 schematic symbol, PCB footprint, and 3D model.
To find more CAD model downloads similar to this part, try a partial part number search, like CAT25, or try a keyword search, such as EEPROMs

Parts related to CAT25010VI-GT3

Showing 0 results

CAT25010VI-GT3 Alternates

Showing results

Image Part Number Model
Part Image CAT25010VE-G onsemi

EEPROM, 128X8, Serial, CMOS, PDSO8

Part Image CAT25010V-TE13REV-C onsemi

EEPROM, 128X8, Serial, CMOS, PDSO8

Part Image CAT25010VA onsemi

EEPROM, 128X8, Serial, CMOS, PDSO8

Part Image CAT25010VA-REV-C onsemi

EEPROM, 128X8, Serial, CMOS, PDSO8

Part Image CAT25010VI-REV-C onsemi

EEPROM, 128X8, Serial, CMOS, PDSO8

For a full list of alternate parts for CAT25010VI-GT3, check out Findchips.com