Part Image

CAT25080VI-GT3 - onsemi

Description: 32-byte page write buffer; SPI modes (0,0 & 1,1); 1.8 V to 5.5 V supply voltage range; 10 MHz SPI compatible; Self-timed write cycle; Hardware and software protection; Block write protection - Protect 1/4, 1/2 or all of EEPROM array; Low power CMOS technology; RoHS-compliant 8 lead SOIC and TSSOP, UDFN 8-pad packages; Industrial temperature range; 100 year data retention; 1,000,000 program/erase cycles

Download CAT25080VI-GT3 Model
Schematic
symbols
Schematic symbol is unavailable for download
PCB
footprints
PCB footprint is unavailable for download
3D
models
3D model is unavailable for download
PCB Footprints
CAT25080VI-GT3 - onsemi PCB footprint - Small Outline Packages - Small Outline Packages - 8-Pin SOIC
click to zoom
3D Models
CAT25080VI-GT3 - onsemi  - 3D model - Small Outline Packages - 8-Pin SOIC
click to zoom

CAT25080VI-GT3 Details

  • Manufacturer Part Number:

    CAT25080VI-GT3

  • Brand Name:

    onsemi

  • Pbfree Code:

    Yes

  • Rohs Code:

    Yes

  • Part Life Cycle Code:

    Active

  • Part Package Code:

    SOIC 8, 150 mils

  • Package Description:

    SOIC-8

  • Pin Count:

    8

  • Manufacturer Package Code:

    751BD

  • Country Of Origin:

    Philippines

  • ECCN Code:

    EAR99

  • HTS Code:

    8542.32.00.51

  • Manufacturer:

    onsemi

  • YTEOL:

    5

  • Additional Feature:

    100 YEAR DATA RETENTION

  • Clock Frequency-Max (fCLK):

    5 MHz

  • Data Retention Time-Min:

    100

  • Endurance:

    1000000 Write/Erase Cycles

  • JESD-30 Code:

    R-PDSO-G8

  • JESD-609 Code:

    e4

  • Length:

    4.9 mm

  • Memory Density:

    8192 bit

  • Memory IC Type:

    EEPROM

  • Memory Width:

    8

  • Moisture Sensitivity Level:

    1

  • Number of Functions:

    1

  • Number of Terminals:

    8

  • Number of Words:

    1024 words

  • Number of Words Code:

    1000

  • Operating Mode:

    SYNCHRONOUS

  • Operating Temperature-Max:

    85 °C

  • Operating Temperature-Min:

    -40 °C

  • Organization:

    1KX8

  • Package Body Material:

    PLASTIC/EPOXY

  • Package Code:

    SOP

  • Package Equivalence Code:

    SOP8,.25

  • Package Shape:

    RECTANGULAR

  • Package Style:

    SMALL OUTLINE

  • Parallel/Serial:

    SERIAL

  • Peak Reflow Temperature (Cel):

    260

  • Qualification Status:

    Not Qualified

  • Seated Height-Max:

    1.75 mm

  • Serial Bus Type:

    SPI

  • Standby Current-Max:

    0.000002 A

  • Supply Current-Max:

    0.002 mA

  • Supply Voltage-Max (Vsup):

    5.5 V

  • Supply Voltage-Min (Vsup):

    2.5 V

  • Supply Voltage-Nom (Vsup):

    5 V

  • Surface Mount:

    YES

  • Technology:

    CMOS

  • Temperature Grade:

    INDUSTRIAL

  • Terminal Finish:

    Nickel/Palladium/Gold (Ni/Pd/Au)

  • Terminal Form:

    GULL WING

  • Terminal Pitch:

    1.27 mm

  • Terminal Position:

    DUAL

  • Time@Peak Reflow Temperature-Max (s):

    30

  • Width:

    3.9 mm

  • Write Cycle Time-Max (tWC):

    5 ms

  • Write Protection:

    HARDWARE/SOFTWARE

CAT25080VI-GT3 Frequently Asked Questions (FAQs)

  • A good PCB layout for the CAT25080VI-GT3 involves keeping the power and ground planes separate, using a solid ground plane, and placing decoupling capacitors close to the device. Additionally, keeping the signal traces short and away from noise sources can help minimize noise and ensure reliable operation.
  • The CAT25080VI-GT3 requires a single 2.7V to 5.5V power supply. To ensure proper operation, the power supply should be stable and free of noise. Power sequencing is not critical, but it is recommended to power up the device after the power supply has stabilized.
  • The CAT25080VI-GT3 can support clock frequencies up to 20 MHz, but the actual frequency limit may depend on the specific application and system design.
  • The CAT25080VI-GT3 provides error detection and correction mechanisms, such as ECC and CRC. In case of errors, the device can be reset and re-initialized. It is also recommended to implement error handling and recovery mechanisms in the system software to handle exceptions and errors.
  • The CAT25080VI-GT3 can be programmed and erased using the SPI interface. The recommended method is to use the device's built-in programming and erase algorithms, which can be controlled through the SPI interface. It is also recommended to follow the device's programming and erase timing specifications to ensure reliable operation.

Trust Checks

This model has been built in collaboration with the manufacturer.
Manufacturer Collaborated
This model has been verified by system checks.
System Verified
This model has been reviewed by community users.
Community Approved
Sponsored

CAT25080VI-GT3 Overview

Use the download button to access the CAT25080VI-GT3 schematic symbol, PCB footprint, and 3D model.
To find more CAD model downloads similar to this part, try a partial part number search, like CAT25, or try a keyword search, such as EEPROMs

Parts related to CAT25080VI-GT3

Showing 0 results

CAT25080VI-GT3 Alternates

Showing results

Image Part Number Model
Part Image CAT25080VI-GT3 Rochester Electronics LLC

1KX8 SPI BUS SERIAL EEPROM, PDSO8, 0.150 INCH, GREEN, MS-012, SOIC-8

Part Image CAT25080VIT3 Catalyst Semiconductor

8KX1 SPI BUS SERIAL EEPROM, PDSO8, 0.150 INCH, GREEN, MS-012, SOIC-8

Part Image CAT25080VE onsemi

EEPROM, 1KX8, Serial, CMOS, PDSO8

Part Image CAT25080VI-G Catalyst Semiconductor

EEPROM

Part Image CAT25080VE-G onsemi

IC,SERIAL EEPROM,1KX8,CMOS,SOP,8PIN,PLASTIC

For a full list of alternate parts for CAT25080VI-GT3, check out Findchips.com