Part Image

CAT25160YI-GT3 - onsemi

Description: 32-byte page write buffer; SPI modes (0,0 & 1,1); 1.8 V to 5.5 V supply voltage range; 10 MHz SPI compatible; Self-timed write cycle; Hardware and software protection; Block write protection - Protect 1/4, 1/2 or all of EEPROM array; Low power CMOS technology; RoHS-compliant 8 lead SOIC, TSSOP and 8-pad UDFN packages; Industrial temperature range; 100 year data retention; 1,000,000 program/erase cycles

Download CAT25160YI-GT3 Model
Schematic
symbols
Schematic symbol is unavailable for download
PCB
footprints
PCB footprint is unavailable for download
3D
models
3D model is unavailable for download
PCB Footprints
CAT25160YI-GT3 - onsemi PCB footprint - Small Outline Packages - Small Outline Packages - TSSOP8 4.4x3 CASE 948AL ISSUE O
click to zoom
3D Models
CAT25160YI-GT3 - onsemi  - 3D model - Small Outline Packages - TSSOP8 4.4x3 CASE 948AL ISSUE O
click to zoom

CAT25160YI-GT3 Details

  • Manufacturer Part Number:

    CAT25160YI-GT3

  • Brand Name:

    onsemi

  • Pbfree Code:

    Yes

  • Rohs Code:

    Yes

  • Part Life Cycle Code:

    Active

  • Part Package Code:

    TSSOP8, 4.4x3

  • Package Description:

    TSSOP-8

  • Pin Count:

    8

  • Manufacturer Package Code:

    948AL

  • Country Of Origin:

    Thailand

  • ECCN Code:

    EAR99

  • HTS Code:

    8542.32.00.51

  • Manufacturer:

    onsemi

  • YTEOL:

    6

  • Additional Feature:

    100 YEAR DATA RETENTION

  • Clock Frequency-Max (fCLK):

    5 MHz

  • Data Retention Time-Min:

    100

  • Endurance:

    1000000 Write/Erase Cycles

  • JESD-30 Code:

    R-PDSO-G8

  • JESD-609 Code:

    e4

  • Length:

    4.4 mm

  • Memory Density:

    16384 bit

  • Memory IC Type:

    EEPROM

  • Memory Width:

    8

  • Moisture Sensitivity Level:

    1

  • Number of Functions:

    1

  • Number of Terminals:

    8

  • Number of Words:

    2048 words

  • Number of Words Code:

    2000

  • Operating Mode:

    SYNCHRONOUS

  • Operating Temperature-Max:

    85 °C

  • Operating Temperature-Min:

    -40 °C

  • Organization:

    2KX8

  • Package Body Material:

    PLASTIC/EPOXY

  • Package Code:

    TSSOP

  • Package Equivalence Code:

    TSSOP8,.25

  • Package Shape:

    RECTANGULAR

  • Package Style:

    SMALL OUTLINE, THIN PROFILE, SHRINK PITCH

  • Parallel/Serial:

    SERIAL

  • Peak Reflow Temperature (Cel):

    260

  • Qualification Status:

    Not Qualified

  • Seated Height-Max:

    1.2 mm

  • Serial Bus Type:

    SPI

  • Standby Current-Max:

    0.000002 A

  • Supply Current-Max:

    0.002 mA

  • Supply Voltage-Max (Vsup):

    5.5 V

  • Supply Voltage-Min (Vsup):

    2.5 V

  • Supply Voltage-Nom (Vsup):

    5 V

  • Surface Mount:

    YES

  • Technology:

    CMOS

  • Temperature Grade:

    INDUSTRIAL

  • Terminal Finish:

    Nickel/Palladium/Gold (Ni/Pd/Au)

  • Terminal Form:

    GULL WING

  • Terminal Pitch:

    0.65 mm

  • Terminal Position:

    DUAL

  • Time@Peak Reflow Temperature-Max (s):

    30

  • Width:

    3 mm

  • Write Cycle Time-Max (tWC):

    5 ms

  • Write Protection:

    HARDWARE/SOFTWARE

CAT25160YI-GT3 Frequently Asked Questions (FAQs)

  • A good PCB layout for the CAT25160YI-GT3 involves placing the device near the battery, using a solid ground plane, and keeping the power traces short and wide. Additionally, it's recommended to use a 4-layer PCB with a dedicated power plane and a dedicated ground plane.
  • To ensure proper power-up and initialization, connect the EN pin to a high-level voltage (e.g., VCC) and make sure the input voltage (VIN) is within the recommended range (2.5V to 5.5V). Also, ensure the device is properly reset by pulling the RST pin low for at least 10ms during power-up.
  • The maximum current that the CAT25160YI-GT3 can deliver is 1.5A. To calculate the maximum current, use the formula: Iout = (VIN - VOUT) / RDS(on), where RDS(on) is the on-state resistance of the internal FET.
  • To protect the CAT25160YI-GT3 from overvoltage and undervoltage conditions, use a voltage supervisor or a voltage monitor IC to detect and respond to voltage faults. Additionally, consider using a TVS diode or a zener diode to clamp voltage transients.
  • For thermal management, ensure good airflow around the device, use a heat sink if necessary, and avoid blocking the thermal pad. To calculate the junction temperature, use the formula: TJ = TA + (PD x θJA), where TA is the ambient temperature, PD is the power dissipation, and θJA is the junction-to-ambient thermal resistance.

Trust Checks

This model has been built in collaboration with the manufacturer.
Manufacturer Collaborated
This model has been verified by system checks.
System Verified
This model has been reviewed by community users.
Community Approved
Sponsored

CAT25160YI-GT3 Overview

Use the download button to access the CAT25160YI-GT3 schematic symbol, PCB footprint, and 3D model.
To find more CAD model downloads similar to this part, try a partial part number search, like CAT25, or try a keyword search, such as EEPROMs

Parts related to CAT25160YI-GT3

Showing 0 results

CAT25160YI-GT3 Alternates

Showing results

Image Part Number Model
Part Image CAT25160YIT3 onsemi

16KX1 SPI BUS SERIAL EEPROM, PDSO8, GREEN, MO-153, TSSOP-8

Part Image CAT25160YI-G Catalyst Semiconductor

EEPROM

Part Image CAT25160YE-GT3 onsemi

EEPROM, 2KX8, Serial, CMOS, PDSO8

Part Image CAT25160YE-G onsemi

EEPROM, 2KX8, Serial, CMOS, PDSO8

Part Image CAT25160YE onsemi

EEPROM, 2KX8, Serial, CMOS, PDSO8

For a full list of alternate parts for CAT25160YI-GT3, check out Findchips.com