The recommended operating voltage range for the CD4060BCN is 3V to 18V, with a typical operating voltage of 5V.
To ensure the oscillator starts reliably, a resistor (R1) and capacitor (C1) should be connected between the oscillator pins (pins 11 and 10). The values of R1 and C1 can be chosen to set the oscillator frequency.
The maximum clock frequency that the CD4060BCN can handle is approximately 1 MHz.
The CD4060BCN counter can be reset by applying a low signal to the reset pin (pin 12). The reset pin is active-low, meaning it must be pulled low to reset the counter.
Yes, the CD4060BCN can be used as a divide-by-N counter by connecting the Qn output (where n is the desired division ratio) to the clock input (pin 11).
Trust Checks
This model has been built in collaboration with the manufacturer.
Manufacturer Collaborated
This model has been verified by system checks.
System Verified
This model has been reviewed by community users.
Community Approved
Sponsored
CD4060BCN Overview
Use the download button to access the CD4060BCN schematic symbol, PCB footprint, and 3D model.
To find more CAD model downloads similar to this part, try a partial part number search, like CD406,
or try a keyword search, such as Counters
Suggested Parts
If you searched for CD4060BCN, you might also be interested in these parts: