CD54NP-180MC - Sumida

CD54NP-180MC Frequently Asked Questions (FAQs)

• What is the recommended PCB layout and footprint for optimal performance?
  Sumida recommends a PCB layout with a minimum of 2oz copper thickness, and a footprint with a minimum of 1.5mm clearance around the component to ensure proper heat dissipation and reduce electromagnetic interference.
• How does the inductor handle high-frequency noise and EMI?
  The CD54NP-180MC is designed to minimize high-frequency noise and EMI through its shielded construction and optimized internal design. However, additional filtering or shielding may be required depending on the specific application and environment.
• What is the maximum operating temperature range for this inductor?
  While the datasheet specifies an operating temperature range of -40°C to +125°C, it's recommended to derate the inductor's current rating by 1.5% per degree Celsius above 100°C to ensure reliable operation.
• Can I use this inductor in a high-vibration or high-shock environment?
  The CD54NP-180MC is designed to withstand moderate vibration and shock, but it's recommended to consult with Sumida Corporation or perform additional testing to ensure the inductor meets the specific requirements of your application.
• Are there any specific soldering or assembly recommendations for this component?
  Sumida recommends using a soldering temperature of 260°C (max) and a soldering time of 3 seconds (max) to prevent damage to the component. Additionally, it's recommended to use a solder with a melting point above 217°C to ensure reliable connections.