The recommended PCB footprint for the CDEP134NP-3R6MC-H is a rectangular pad with dimensions of 3.5mm x 2.5mm, with a 1.5mm diameter hole in the center for the inductor's lead.
The CDEP134NP-3R6MC-H has a maximum operating temperature of 125°C. Ensure good airflow around the inductor, and consider using a heat sink or thermal pad if the inductor will be operating near its maximum temperature rating.
The saturation current rating of the CDEP134NP-3R6MC-H is not explicitly stated in the datasheet. However, as a general rule of thumb, the saturation current is typically around 1.5 to 2 times the inductor's rated current. In this case, the rated current is 3.6A, so the saturation current would be around 5.4A to 7.2A.
The CDEP134NP-3R6MC-H is designed for general-purpose use and has a self-resonant frequency of around 100MHz. While it can be used in high-frequency applications, its performance may degrade above 10MHz. For high-frequency applications, consider using a specialized high-frequency inductor.
To ensure the reliability of the CDEP134NP-3R6MC-H in a high-reliability application, follow proper storage and handling procedures, ensure the inductor is operated within its specified ratings, and consider using a redundant or fault-tolerant design.
Trust Checks
This model has been provided by an expert contributor.
Expert Contribution
This model has been verified by system checks.
System Verified
This model has been reviewed by community users.
Community Approved
Sponsored
CDEP134NP-3R6MC-H Overview
Use the download button to access the CDEP134NP-3R6MC-H schematic symbol, PCB footprint, and 3D model.
To find more CAD model downloads similar to this part, try a partial part number search, like CDEP1,
or try a keyword search, such as Fixed Inductors
