The recommended land pattern for the CDEP147NP-4R7MC-73 inductor is typically provided in the manufacturer's application notes or can be obtained by contacting Sumida Corporation's technical support. A general guideline is to use a land pattern with a pad size of 2.5mm x 1.6mm and a spacing of 1.3mm between pads.
The CDEP147NP-4R7MC-73 inductor has a maximum operating temperature of 125°C. To handle thermal considerations, ensure good airflow around the component, avoid overheating, and follow proper PCB design guidelines for thermal management. You can also consider using thermal vias or thermal pads to dissipate heat.
The self-resonant frequency (SRF) of the CDEP147NP-4R7MC-73 inductor is not explicitly stated in the datasheet. However, it can be estimated using the inductor's inductance value and the parasitic capacitance. As a rough estimate, the SRF can be calculated using the formula: SRF ≈ 1 / (2 * π * sqrt(L * C)), where L is the inductance and C is the parasitic capacitance.
The CDEP147NP-4R7MC-73 inductor is suitable for high-frequency applications up to several hundred kHz. However, its performance may degrade at very high frequencies (e.g., above 1 MHz) due to the inductor's parasitic capacitance and resistance. It's essential to evaluate the inductor's performance in your specific application and consider using a different component if necessary.
To ensure the reliability and longevity of the CDEP147NP-4R7MC-73 inductor, follow proper storage and handling procedures, avoid mechanical stress, and operate the component within its specified ratings. Additionally, consider using a conformal coating to protect the component from environmental factors and ensure good soldering practices during assembly.
Trust Checks
This model has been provided by community users.
Community Provided
This model has been verified by system checks.
System Verified
This model has been reviewed by community users.
Community Approved
Sponsored
CDEP147NP-4R7MC-73 Overview
Use the download button to access the CDEP147NP-4R7MC-73 schematic symbol, PCB footprint, and 3D model.
To find more CAD model downloads similar to this part, try a partial part number search, like CDEP1,
or try a keyword search, such as Fixed Inductors
