A symmetrical layout with a solid ground plane and a minimum of 10 mils of clearance around the component is recommended. Additionally, the input and output pins should be routed away from each other to minimize electromagnetic interference.
To ensure reliability, it is recommended to derate the component's power rating by 1.5% for every 1°C above 40°C. Additionally, the component should be mounted on a heat sink with a thermal resistance of 10°C/W or less.
The maximum allowable voltage stress for the CDRH125/LDNP-220MC is 1.5 times the rated voltage for a maximum of 10 seconds. Exceeding this limit may cause permanent damage to the component.
Yes, the CDRH125/LDNP-220MC can be used in parallel to increase the power rating, but it is recommended to use a current-sharing technique to ensure equal current distribution among the components.
The CDRH125/LDNP-220MC should be stored in a dry, cool place with a temperature range of -20°C to 40°C and humidity below 60%. The component should be stored in its original packaging or in a shielded bag to prevent electrostatic discharge.
Trust Checks
This model has been provided by community users.
Community Provided
This model has been verified by system checks.
System Verified
This model has been reviewed by community users.
Community Approved
Sponsored
CDRH125/LDNP-220MC Overview
Use the download button to access the CDRH125/LDNP-220MC schematic symbol, PCB footprint, and 3D model.
To find more CAD model downloads similar to this part, try a partial part number search, like CDRH1,
or try a keyword search, such as Fixed Inductors
