The recommended land pattern for the CDRH2D14NP-2R2NC can be found in the Sumida Corporation's application note or the IPC-7351 standard. It typically includes a rectangular pad with a size of 2.5mm x 1.5mm, with a 0.5mm hole in the center for the inductor's terminal.
The CDRH2D14NP-2R2NC has a maximum operating temperature of 125°C. To ensure reliable operation, it's essential to consider thermal management strategies such as heat sinks, thermal vias, and adequate airflow in the design. Additionally, the PCB layout should be designed to minimize thermal resistance and ensure good heat dissipation.
The recommended soldering profile for the CDRH2D14NP-2R2NC follows the JEDEC J-STD-020 standard. A typical reflow soldering profile would include a peak temperature of 240°C, with a dwell time of 30-60 seconds above 217°C. It's essential to consult the datasheet and application notes for specific guidance on soldering profiles.
The CDRH2D14NP-2R2NC is designed to meet various safety and regulatory standards, including UL, EN, and RoHS. To ensure compliance, it's essential to follow the manufacturer's guidelines, use the component in the intended application, and perform necessary testing and certification for the final product.
The ESR of the CDRH2D14NP-2R2NC is not explicitly stated in the datasheet. However, it can be estimated based on the inductor's design and materials. A typical ESR value for a similar inductor would be in the range of 0.05-0.5 ohms. For accurate ESR values, it's recommended to consult the manufacturer or perform measurements using an impedance analyzer.
Trust Checks
This model has been verified by system checks.
System Verified
Sponsored
CDRH2D14NP-2R2NC Overview
Use the download button to access the CDRH2D14NP-2R2NC schematic symbol, PCB footprint, and 3D model.
To find more CAD model downloads similar to this part, try a partial part number search, like CDRH2,
or try a keyword search, such as Fixed Inductors
