The recommended land pattern for the CDRH2D14NP-4R7NC can be found in the Sumida Corporation's application note or by contacting their technical support. A general guideline is to use a land pattern with a pad size of 2.5mm x 1.6mm and a spacing of 1.5mm between pads.
The CDRH2D14NP-4R7NC has a maximum operating temperature of 125°C. Ensure that the PCB design provides adequate thermal relief and consider using thermal vias or heat sinks if necessary. Also, follow the recommended derating curves for the inductor's current rating based on the ambient temperature.
The self-resonant frequency of the CDRH2D14NP-4R7NC is not explicitly stated in the datasheet. However, it can be estimated using the inductor's inductance and capacitance values. As a rough estimate, the self-resonant frequency can be calculated using the formula: f_res = 1 / (2 * π * sqrt(L * C)), where L is the inductance and C is the capacitance.
The CDRH2D14NP-4R7NC is designed for general-purpose use and may not be suitable for high-frequency applications. The inductor's performance at high frequencies (above 100 MHz) may be affected by its self-resonant frequency, skin effect, and proximity effect. For high-frequency applications, consider using specialized inductors designed for high-frequency use.
To ensure the CDRH2D14NP-4R7NC meets your application's requirements, review the datasheet and application notes, and consider the following: operating frequency, current rating, inductance tolerance, and temperature range. If necessary, consult with Sumida Corporation's technical support or perform custom testing to validate the inductor's performance in your specific application.
Trust Checks
This model has been provided by community users.
Community Provided
This model has been verified by system checks.
System Verified
This model has been reviewed by community users.
Community Approved
Sponsored
CDRH2D14NP-4R7NC Overview
Use the download button to access the CDRH2D14NP-4R7NC schematic symbol and PCB footprint.
To find more CAD model downloads similar to this part, try a partial part number search, like CDRH2,
or try a keyword search, such as Fixed Inductors
