CDRH5D16NP-4R7NC footprint, schematic symbol and 3D model by Sumida

Symbol

PCB Footprints

3D Models

CDRH5D16NP-4R7NC Details

The recommended PCB land pattern for the CDRH5D16NP-4R7NC is a rectangular pad with a size of 3.5mm x 2.5mm, with a 1.5mm diameter hole in the center for the inductor's lead.
To ensure the CDRH5D16NP-4R7NC operates within its specified temperature range, ensure that the ambient temperature is within the range of -40°C to 125°C, and that the inductor is not exposed to excessive heat sources or thermal stress.
The maximum current rating for the CDRH5D16NP-4R7NC is 1.6A, based on a temperature rise of 40°C. However, the actual current rating may vary depending on the specific application and operating conditions.
Handle the CDRH5D16NP-4R7NC by the body, avoiding touching the leads or the inductor core. Use a vacuum pickup or tweezers to handle the component, and avoid bending or flexing the leads. For rework, use a low-temperature soldering iron and a solder with a melting point below 200°C.
The equivalent series resistance (ESR) of the CDRH5D16NP-4R7NC is approximately 0.15 ohms at 100 kHz, but this value may vary depending on the frequency and operating conditions.

Community Provided

System Verified

Community Approved

Use the download button to access the CDRH5D16NP-4R7NC schematic symbol, PCB footprint, and 3D model.

To find more CAD model downloads similar to this part, try a partial part number search, like CDRH5, or try a keyword search, such as Fixed Inductors

If you searched for CDRH5D16NP-4R7NC, you might also be interested in these parts:

Showing 0 results


Please enter a minimum 3 letters or numbers
← Prev Next →