The recommended PCB land pattern can be found in the Sumida Corporation's application note or by contacting their technical support. A general guideline is to use a land pattern with a minimum pad size of 3.5mm x 2.5mm and a spacing of 1.5mm between pads.
The CDRH6D38NP-390NC is designed to minimize high-frequency noise and EMI due to its shielded construction and low radiation design. However, additional EMI filtering or shielding may be required depending on the specific application and regulatory requirements.
The maximum operating temperature range for the CDRH6D38NP-390NC is -40°C to +125°C, with a derating of inductance and saturation current above 100°C.
The CDRH6D38NP-390NC is designed to withstand moderate vibration and shock, but its performance may be affected in extreme environments. It's recommended to consult with Sumida Corporation's technical support or perform additional testing to ensure the inductor meets the specific requirements of the application.
The CDRH6D38NP-390NC should be stored in a dry, cool place away from direct sunlight and moisture. It's recommended to handle the components with anti-static wrist straps or mats to prevent electrostatic discharge damage.
Trust Checks
This model has been provided by an expert contributor.
Expert Contribution
This model has been verified by system checks.
System Verified
This model has been reviewed by community users.
Community Approved
Sponsored
CDRH6D38NP-390NC Overview
Use the download button to access the CDRH6D38NP-390NC schematic symbol and PCB footprint.
To find more CAD model downloads similar to this part, try a partial part number search, like CDRH6,
or try a keyword search, such as Fixed Inductors
