The recommended PCB land pattern for the CDRH8D43NP-101NC can be found in the Sumida Corporation's application note or by contacting their technical support team. Typically, it involves a rectangular pad with a size of around 3.5mm x 2.5mm, with a 1.5mm diameter hole in the center for the inductor's lead.
The CDRH8D43NP-101NC has a maximum operating temperature of 125°C. Ensure that your design takes into account the inductor's thermal characteristics, such as its thermal resistance (Rth) of 20°C/W. You may need to implement thermal management techniques, such as heat sinks or thermal vias, to keep the inductor within its operating temperature range.
While the datasheet provides information on the inductor's inductance and Q factor at specific frequencies, its behavior under high-frequency conditions may not be immediately apparent. You may need to consult with Sumida Corporation's technical support or perform your own testing to understand the inductor's performance at frequencies above 1 MHz.
The CDRH8D43NP-101NC has a maximum current rating of 4.3A. If your design requires higher currents, you may need to consider using multiple inductors in parallel or selecting a different inductor with a higher current rating. Be sure to consult the datasheet and application notes for guidance on current handling and derating.
To ensure the reliability and longevity of the CDRH8D43NP-101NC, follow proper storage and handling procedures, avoid exceeding the maximum ratings, and implement adequate soldering and assembly techniques. Additionally, consider implementing fault detection and protection mechanisms in your design to prevent overvoltage, overcurrent, and other stress conditions that could affect the inductor's reliability.
Trust Checks
This model has been provided by an expert contributor.
Expert Contribution
This model has been verified by system checks.
System Verified
This model has been reviewed by community users.
Community Approved
Sponsored
CDRH8D43NP-101NC Overview
Use the download button to access the CDRH8D43NP-101NC schematic symbol, PCB footprint, and 3D model.
To find more CAD model downloads similar to this part, try a partial part number search, like CDRH8,
or try a keyword search, such as Fixed Inductors
