A symmetrical layout with a solid ground plane and minimal signal trace length is recommended. Keep the oscillator circuitry away from noisy components and ensure a low-impedance path to ground.
Ensure the power supply is stable and has a low ripple. Use a high-quality decoupling capacitor (e.g., 0.1 μF) close to the VCC pin. Avoid over-specifying the load capacitance, and ensure the oscillator circuit is properly terminated.
The recommended operating temperature range for CER0017A is -40°C to +85°C. However, the device can tolerate temperatures up to +125°C for short periods during manufacturing or testing.
Yes, but ensure the device is properly mounted and secured to the PCB to prevent mechanical stress. CTS Corporation recommends following IPC-J-STD-001 guidelines for soldering and assembly.
Use an oscilloscope to verify the oscillator output. Check the power supply, decoupling, and load capacitance. Ensure the oscillator circuit is properly terminated and not overloaded. Consult the datasheet and application notes for guidance.
Trust Checks
This model has been built in collaboration with the manufacturer.
Manufacturer Collaborated
This model has been verified by system checks.
System Verified
This model has been reviewed by community users.
Community Approved
Sponsored
CER0017A Overview
Use the download button to access the CER0017A schematic symbol, PCB footprint, and 3D model.
To find more CAD model downloads similar to this part, try a partial part number search, like CER00,
or try a keyword search, such as Duplexers
