OVER CURRENT; OVER VOLTAGE; OVER TEMPERATURE; SHORT CIRCUIT
Ripple Voltage (Main Out):
0.1 Vrms
Screening Level:
EN/IEC/UL 62368-1
Seated Height-Max:
13.2 mm
Surface Mount:
NO
Technology:
HYBRID
Terminal Form:
PIN/PEG
Terminal Position:
UNSPECIFIED
Total Power Output-Max:
800 W
Trim/Adjustable Output:
YES
Warm-up Time:
0.3 s
Width:
61 mm
CFB800-24S28 Frequently Asked Questions (FAQs)
The recommended PCB layout involves placing the DC-DC converter near the power source, using a solid ground plane, and keeping the input and output capacitors close to the converter. For thermal management, ensure good airflow, use a heat sink if necessary, and keep the ambient temperature within the specified range.
To ensure EMC, follow proper PCB layout and grounding practices, use shielding if necessary, and consider adding EMI filters or common-mode chokes to the input and output lines. Also, ensure that the CFB800-24S28 is operated within its specified frequency range.
The maximum allowable ripple current for the input and output capacitors depends on the specific capacitor type and rating. As a general guideline, the ripple current should not exceed 30-40% of the capacitor's rated current. Consult the capacitor datasheet for specific information.
Yes, the CFB800-24S28 can be used in a redundant or parallel configuration, but it requires careful design and consideration of the system's overall architecture, including synchronization, current sharing, and fault detection. Consult Cincon Electronics Corporation's application notes or contact their technical support for guidance.
The CFB800-24S28 is commonly used in industrial control systems, telecommunications, data centers, and other high-reliability applications where a compact, high-efficiency DC-DC converter is required. It is also used in medical, aerospace, and defense applications where high reliability and ruggedness are essential.
Trust Checks
No trust score is available for this model.
Trust Score Unavailable
Sponsored
CFB800-24S28 Overview
Use the download button to access the CFB800-24S28 3D model. You can still request or build the schematic symbol and PCB footprint by using the respective build or request forms on this page.
To find more CAD model downloads similar to this part, try a partial part number search, like CFB80,
or try a keyword search, such as Power Supply Modules
