A recommended PCB layout for optimal thermal performance would be to have a solid copper plane under the device, with multiple vias to the inner layers to dissipate heat. Additionally, keeping the PCB traces wide and short can help reduce thermal resistance.
To ensure reliable soldering, use a soldering iron with a temperature range of 250°C to 260°C, and a solder with a melting point of 217°C to 221°C. Apply a small amount of solder paste to the pads, and use a reflow oven or a hot air gun to solder the device. Avoid using excessive solder or flux, as it can lead to reliability issues.
The CG2230LSTR has a surge current rating of 100A for 8/20μs pulses, as per the IEC 61000-4-5 standard. However, it's essential to note that the device can handle higher surge currents for shorter pulse durations.
While the CG2230LSTR is primarily designed for low-frequency applications, it can be used in high-frequency applications up to 100 kHz. However, the device's performance may degrade at higher frequencies due to internal capacitance and inductance. It's recommended to consult with Littelfuse Inc or perform thorough testing to ensure the device meets the specific application requirements.
When selecting a fuse holder or clip for the CG2230LSTR, ensure it is compatible with the device's physical dimensions and has a secure grip to prevent the fuse from being dislodged during operation. Consult with Littelfuse Inc or the fuse holder/clip manufacturer for recommendations on compatible products.
Trust Checks
This model has been provided by community users.
Community Provided
This model has been verified by system checks.
System Verified
This model has been reviewed by community users.
Community Approved
Sponsored
CG2230LSTR Overview
Use the download button to access the CG2230LSTR schematic symbol and PCB footprint.
To find more CAD model downloads similar to this part, try a partial part number search, like CG223,
or try a keyword search, such as Telecom Protection Circuits
Suggested Parts
If you searched for CG2230LSTR, you might also be interested in these parts:
