The recommended PCB layout for the CG2300L involves keeping the input and output traces as short as possible, using a solid ground plane, and placing the device close to the power source to minimize inductance. Additionally, it's recommended to use a common mode choke or ferrite bead to filter out high-frequency noise.
To ensure proper cooling, the CG2300L should be mounted on a heat sink with a thermal resistance of less than 10°C/W. The heat sink should be designed to provide adequate airflow, and the device should be placed in a location that allows for good air circulation. Additionally, the device's thermal pad should be soldered to the heat sink to ensure good thermal contact.
The CG2300L has a maximum surge current rating of 100A for 1ms, and 50A for 10ms. It's essential to ensure that the device is not subjected to surge currents exceeding these ratings to prevent damage or failure.
The CG2300L is rated for operation up to 125°C, but its performance and reliability may be affected at high temperatures. It's recommended to derate the device's current rating by 1.5% per degree Celsius above 85°C to ensure reliable operation.
To select the correct fuse rating, you should consider the maximum current rating of the CG2300L, the maximum inrush current of the load, and the desired fault-clearing time. A fuse with a rating that is too low may not provide adequate protection, while a rating that is too high may not clear faults quickly enough.
Trust Checks
This model has been provided by an expert contributor.
Expert Contribution
This model has been verified by system checks.
System Verified
This model has been reviewed by community users.
Community Approved
Sponsored
CG2300L Overview
Use the download button to access the CG2300L schematic symbol, PCB footprint, and 3D model.
To find more CAD model downloads similar to this part, try a partial part number search, like CG230,
or try a keyword search, such as Telecom Protection Circuits
