The recommended land pattern for the CHP0603AFX-1001ELF is a rectangular pad with a size of 0.65 mm x 0.65 mm, with a non-solder mask defined (NSMD) pad shape. This is to ensure proper soldering and to minimize the risk of solder bridging.
The CHP0603AFX-1001ELF has a maximum operating temperature of 125°C. To ensure reliable operation, it's essential to consider thermal management in your design. This includes providing adequate airflow, using thermal vias, and keeping the inductor away from heat sources.
The self-resonant frequency of the CHP0603AFX-1001ELF is not explicitly stated in the datasheet. However, based on the inductor's characteristics, it's typically in the range of 100-200 MHz. This frequency should be considered when designing the circuit to avoid resonance and ensure proper operation.
The CHP0603AFX-1001ELF is a surface-mount device and can be susceptible to vibration. While it's designed to meet standard reliability requirements, it's essential to consider the vibration environment in your application. If the vibration levels are excessive, additional mechanical support or a more robust inductor design may be necessary.
The saturation current of the CHP0603AFX-1001ELF is not explicitly stated in the datasheet. However, it can be estimated based on the inductor's characteristics and the application's requirements. A general rule of thumb is to limit the peak current to 1.5-2 times the rated current to avoid saturation.
Trust Checks
This model has been provided by community users.
Community Provided
This model has been verified by system checks.
System Verified
This model has been reviewed by community users.
Community Approved
Sponsored
CHP0603AFX-1001ELF Overview
Use the download button to access the CHP0603AFX-1001ELF schematic symbol, PCB footprint, and 3D model.
To find more CAD model downloads similar to this part, try a partial part number search, like CHP06,
or try a keyword search, such as Metal Glaze/Thick Film Resistors
