Bourns recommends a 4-layer PCB with a solid ground plane, and to keep the high-frequency signals away from the power supply lines. A good layout practice is to use a star-configuration for the power supply lines and to decouple the power supply with capacitors.
Use a soldering iron with a temperature range of 250°C to 260°C, and ensure the soldering time is within 3-5 seconds. Avoid applying excessive force or pressure, which can cause thermal damage. Also, use a solder with a melting point above 217°C to prevent thermal shock.
The CHP2512AFX-1001ELF can operate within a temperature range of -40°C to 125°C, but the recommended operating temperature range is -20°C to 85°C for optimal performance and reliability.
Store the CHP2512AFX-1001ELF in its original packaging or an equivalent ESD-protective package. Avoid exposing the device to moisture, extreme temperatures, or physical stress. During shipping, ensure the package is properly sealed and protected from mechanical shock and vibration.
Bourns recommends a reflow soldering profile with a peak temperature of 260°C, a ramp-up rate of 3°C/s, and a dwell time above 217°C for 60-90 seconds. Ensure the temperature profile is within the specified range to prevent thermal damage.
Trust Checks
This model has been provided by community users.
Community Provided
This model has been verified by system checks.
System Verified
This model has been reviewed by community users.
Community Approved
Sponsored
CHP2512AFX-1001ELF Overview
Use the download button to access the CHP2512AFX-1001ELF schematic symbol, PCB footprint, and 3D model.
To find more CAD model downloads similar to this part, try a partial part number search, like CHP25,
or try a keyword search, such as Metal Glaze/Thick Film Resistors
