Part Image

CM3440Z171B-10 - Laird Technologies

Description: Common Mode Chokes / Filters 170ohms 100MHz 20A 1 Choke Thru-hole

Download CM3440Z171B-10 Model
Schematic
symbols
Schematic symbol is unavailable for download
PCB
footprints
PCB footprint is unavailable for download
3D
models
3D model is unavailable for download
3D Models
CM3440Z171B-10 - Laird Technologies  - 3D model
click to zoom
Note! To download footprints and symbols, use the build and request forms below

Build

Launch Build Wizard
Build Wizard not available for this package category!

Request (48 hours)

CM3440Z171B-10 Details

  • Manufacturer Part Number:

    CM3440Z171B-10

  • Pbfree Code:

    Yes

  • Rohs Code:

    Yes

  • Part Life Cycle Code:

    Active

  • Package Description:

    ROHS COMPLIANT PACKAGE-4

  • Country Of Origin:

    Mainland China

  • ECCN Code:

    EAR99

  • HTS Code:

    8504.50.80.00

  • Factory Lead Time:

    13 Weeks

  • Manufacturer:

    Qnity Laird

  • YTEOL:

    7

  • DC Resistance-Max:

    0.001 Ω

  • Filter Type:

    DATA LINE FILTER

  • Height:

    9.32 mm

  • JESD-609 Code:

    e3

  • Length:

    10.03 mm

  • Mounting Type:

    THROUGH HOLE MOUNT

  • Number of Functions:

    2

  • Number of Terminals:

    4

  • Operating Temperature-Max:

    125 °C

  • Operating Temperature-Min:

    -40 °C

  • Output Impedance:

    170 OHM Ω

  • Rated Current:

    20 A

  • Terminal Finish:

    Matte Tin (Sn) - with Nickel (Ni) barrier

  • Width:

    8.51 mm

CM3440Z171B-10 Frequently Asked Questions (FAQs)

  • Laird PLC recommends a PCB layout with a solid ground plane and thermal vias to dissipate heat. A thermal pad on the bottom of the device should be connected to a heat sink or a thermal interface material to ensure efficient heat transfer.
  • Follow Laird PLC's recommended soldering profile and use a solder with a melting point above 217°C. Ensure the PCB is clean and dry, and use a soldering iron with a temperature range of 250-270°C. Avoid applying excessive force or bending the component during assembly.
  • The CM3440Z171B-10 is rated for operation from -40°C to +85°C. However, the device's performance and reliability may degrade if operated outside the recommended temperature range of -20°C to +70°C.
  • Check the PCB layout and thermal management for any issues. Verify the device is properly soldered and assembled. Use a signal analyzer or oscilloscope to diagnose signal quality issues. For overheating, ensure proper heat sinking and thermal management.
  • Yes, Laird PLC recommends using a metal shield or a conductive enclosure to minimize EMI radiation. Ensure the device is properly grounded to the PCB's ground plane, and use a common mode choke or ferrite bead to filter out high-frequency noise.

Trust Checks

No trust score is available for this model.
Trust Score Unavailable
Sponsored

CM3440Z171B-10 Overview

Use the download button to access the CM3440Z171B-10 3D model. You can still request or build the schematic symbol and PCB footprint by using the respective build or request forms on this page.
To find more CAD model downloads similar to this part, try a partial part number search, like CM344, or try a keyword search, such as Data Line Filters

Parts related to CM3440Z171B-10

Showing 0 results

Select Package Category

Package Categories

Datasheet PDF Preview

CM3440Z171B-10 Alternates

Showing results

Image Part Number Model
Part Image CM3440Z171B-10 Steward, Inc

Data Line Filter, 4 Function(s), 20A, 4 Pin(s)