A 4-layer PCB with a solid ground plane and a separate power plane is recommended. Keep the signal path as short as possible and use 50-ohm microstrip lines for input and output.
Bias the amplifier at a quiescent current of 150-200 mA for optimal linearity. Adjust the bias voltage to achieve the desired current.
The maximum input power is +10 dBm. Exceeding this may cause compression and distortion.
Yes, the CMPA2060035F can be used in a push-pull configuration to achieve higher output power and improved linearity.
The thermal resistance of the package is 25°C/W. Ensure proper heat sinking to maintain a junction temperature below 150°C.
Trust Checks
No trust score is available for this model.
Trust Score Unavailable
Sponsored
CMPA2060035F Overview
Use the download button to access the CMPA2060035F 3D model. You can still request or build the schematic symbol and PCB footprint by using the respective build or request forms on this page.
To find more CAD model downloads similar to this part, try a partial part number search, like CMPA2,
or try a keyword search, such as RF/Microwave Amplifiers
