The recommended operating temperature range for the CR02AM-8#BD0 is -40°C to 125°C.
The CR02AM-8#BD0 has a built-in POR and BOR circuit. The POR is triggered when the power supply voltage rises above 1.9V, and the BOR is triggered when the power supply voltage falls below 1.7V. You can use external resistors and capacitors to adjust the reset timing and threshold voltage.
The CR02AM-8#BD0 supports a maximum clock frequency of 32 MHz.
The CR02AM-8#BD0 has a built-in UART interface. You can configure the UART interface by setting the baud rate, data bits, parity, and stop bits using the UART control registers. You can also use the internal clock or an external clock source for the UART.
Yes, the CR02AM-8#BD0 has several low-power modes, including sleep mode, stop mode, and deep standby mode. You can use these modes to reduce power consumption and extend battery life in battery-powered applications.
Trust Checks
This model has been built in collaboration with the manufacturer.
Manufacturer Collaborated
This model has been verified by system checks.
System Verified
This model has been reviewed by community users.
Community Approved
Sponsored
CR02AM-8#BD0 Overview
Use the download button to access the CR02AM-8#BD0 schematic symbol, PCB footprint, and 3D model.
To find more CAD model downloads similar to this part, try a partial part number search, like CR02A,
or try a keyword search, such as Silicon Controlled Rectifiers
Suggested Parts
If you searched for CR02AM-8#BD0, you might also be interested in these parts: