The recommended land pattern for the CR0402-FX-16R2GLF is a rectangular pad with a size of 0.5 mm x 0.25 mm, with a non-solder mask defined (NSMD) pad shape. This can be found in the Bourns application note 'Surface Mount Resistor Land Patterns'.
The CR0402-FX-16R2GLF is a moisture-sensitive device and should be stored in a dry environment with a relative humidity of less than 30%. If the resistor is exposed to moisture, it should be baked in a dry environment at 125°C for 24 hours before soldering.
The maximum soldering temperature for the CR0402-FX-16R2GLF is 260°C, and the maximum soldering time is 10 seconds. Exceeding these limits can cause damage to the resistor.
While the CR0402-FX-16R2GLF is a general-purpose resistor, it is not optimized for high-frequency applications. For high-frequency applications, Bourns recommends using their high-frequency resistor series, such as the CR0402-FX-16R2GLHF.
The CR0402-FX-16R2GLF has a temperature coefficient of resistance (TCR) of ±100 ppm/°C, which means that the resistor value can vary by up to ±1% over the operating temperature range of -55°C to 125°C.
Trust Checks
This model has been built in collaboration with the manufacturer.
Manufacturer Collaborated
This model has been verified by system checks.
System Verified
This model has been reviewed by community users.
Community Approved
Sponsored
CR0402-FX-16R2GLF Overview
Use the download button to access the CR0402-FX-16R2GLF schematic symbol, PCB footprint, and 3D model.
To find more CAD model downloads similar to this part, try a partial part number search, like CR040,
or try a keyword search, such as Ruthenium Oxide Resistors
