The recommended land pattern for the CR1206-FX-1203ELF is a rectangular pad with a size of 1.5 mm x 3.5 mm, with a non-solder mask defined (NSMD) pad shape. This can be found in the Bourns application note 'Surface Mount Resistor Land Pattern' (document number 3281).
Yes, the CR1206-FX-1203ELF is compatible with lead-free soldering processes. Bourns specifies that this resistor is suitable for reflow soldering up to 260°C, which is within the typical temperature range for lead-free soldering.
The power rating of the CR1206-FX-1203ELF decreases as the temperature increases. According to the datasheet, the power rating is 0.25 W at 70°C, 0.2 W at 85°C, and 0.15 W at 105°C. Engineers should derate the power accordingly based on the operating temperature.
The CR1206-FX-1203ELF is a general-purpose chip resistor and is not specifically designed for high-frequency applications. While it can be used in high-frequency circuits, its performance may not be optimal due to parasitic inductance and capacitance. Engineers should consider using a high-frequency resistor or a resistor with a specific high-frequency design if high-frequency performance is critical.
The CR1206-FX-1203ELF has a moisture sensitivity level (MSL) of 1, which means it can be exposed to a maximum of 30°C/60% relative humidity for 192 hours without being baked prior to reflow soldering.
Trust Checks
This model has been generated by a fully automated process.
Machine Generated
This model has been verified by system checks.
System Verified
This model has been reviewed by community users.
Community Approved
Sponsored
CR1206-FX-1203ELF Overview
Use the download button to access the CR1206-FX-1203ELF schematic symbol, PCB footprint, and 3D model.
To find more CAD model downloads similar to this part, try a partial part number search, like CR120,
or try a keyword search, such as Ruthenium Oxide Resistors
