The recommended wiring method is to use a shielded cable with a twisted pair for the analog output signal to minimize electromagnetic interference (EMI).
Calibration is not required for the CR18-8DP as it is a pre-calibrated device. However, it is recommended to perform a zero-point adjustment after installation to ensure accurate measurements.
The response time of the CR18-8DP is typically around 100 ms, but this may vary depending on the specific application and environmental conditions.
The CR18-8DP is not designed for use in hazardous locations and does not have any explosion-proof or intrinsic safety certifications. It is intended for use in general industrial environments.
The maximum recommended cable length for the analog output signal is 100 meters. Exceeding this length may result in signal degradation or loss.
Trust Checks
No trust score is available for this model.
Trust Score Unavailable
Sponsored
CR18-8DP Overview
Use the download button to access the CR18-8DP 3D model. You can still request or build the schematic symbol and PCB footprint by using the respective build or request forms on this page.
To find more CAD model downloads similar to this part, try a partial part number search, like CR18-,
or try a keyword search, such as Proximity Sensors
