The recommended land pattern for the CRG2512-FZ-R400E-1 is a rectangular pad with a size of 1.3 mm x 2.5 mm, with a non-solder mask defined (NSMD) pad shape. The pad should be centered on the component and have a minimum clearance of 0.2 mm from the component body.
The CRG2512-FZ-R400E-1 is rated for operation up to 155°C, but it's recommended to derate the power rating at higher temperatures. For example, at 125°C, the power rating is reduced to 75% of the maximum rating. Consult the datasheet for more information on temperature derating.
The CRG2512-FZ-R400E-1 is a general-purpose chip resistor and is not optimized for high-frequency applications. It may exhibit significant inductance and capacitance at high frequencies, which can affect its performance. If you need a high-frequency resistor, consider using a specialized high-frequency resistor or a thin-film resistor.
The CRG2512-FZ-R400E-1 is not designed for use in humid or wet environments. It's recommended to use a conformal coating or potting compound to protect the resistor from moisture. Consult the datasheet for more information on environmental ratings.
The recommended soldering profile for the CRG2512-FZ-R400E-1 is a peak temperature of 260°C, with a dwell time of 10-30 seconds. The soldering process should be done in a nitrogen atmosphere to prevent oxidation. Consult the datasheet for more information on soldering guidelines.
Trust Checks
This model has been built in collaboration with the manufacturer.
Manufacturer Collaborated
This model has been verified by system checks.
System Verified
This model has been reviewed by community users.
Community Approved
Sponsored
CRG2512-FZ-R400E-1 Overview
Use the download button to access the CRG2512-FZ-R400E-1 schematic symbol, PCB footprint, and 3D model.
To find more CAD model downloads similar to this part, try a partial part number search, like CRG25,
or try a keyword search, such as Metal Strip Resistors
