The recommended land pattern for the CRL0603-JW-3R30ELF is a rectangular pad with a size of 0.6 mm x 0.3 mm, with a non-solder mask defined (NSMD) pad shape. The pad should be centered on the component and have a clearance of at least 0.1 mm from the component body.
The CRL0603-JW-3R30ELF should be stored in a dry, cool place, away from direct sunlight and moisture. It should be shipped in its original packaging or in a similar protective package to prevent mechanical damage and electrostatic discharge (ESD).
The maximum power rating for the CRL0603-JW-3R30ELF is 0.1 W. Exceeding this rating can cause the resistor to overheat, leading to a reduction in its lifespan or even failure.
The CRL0603-JW-3R30ELF is a general-purpose resistor and is not specifically designed for high-frequency applications. However, it can be used in high-frequency circuits up to a few hundred MHz, depending on the specific application and requirements. For high-frequency applications, it is recommended to use a resistor with a higher frequency rating, such as the Bourns CR series.
The CRL0603-JW-3R30ELF can be soldered using a standard reflow soldering process with a peak temperature of 260°C. The recommended soldering time is 3-5 seconds, and the recommended soldering iron temperature is 350°C. It is also recommended to use a solder with a melting point of 217°C or higher.
Trust Checks
This model has been provided by community users.
Community Provided
This model has been verified by system checks.
System Verified
This model has been reviewed by community users.
Community Approved
Sponsored
CRL0603-JW-3R30ELF Overview
Use the download button to access the CRL0603-JW-3R30ELF schematic symbol, PCB footprint, and 3D model.
To find more CAD model downloads similar to this part, try a partial part number search, like CRL06,
or try a keyword search, such as Metal Glaze/Thick Film Resistors
