Bourns provides a recommended PCB layout and land pattern in their application notes. It's essential to follow these guidelines to ensure optimal performance, low thermal resistance, and minimal parasitic inductance.
To minimize electromagnetic interference (EMI), keep the inductor at least 5 mm away from sensitive components. You can also use shielding techniques, such as copper pours or EMI shields, to contain the magnetic field.
While the datasheet specifies a maximum current rating, it's essential to consider the voltage across the inductor as well. As a general rule, keep the voltage across the inductor below 2x the maximum rated voltage to prevent saturation and ensure reliable operation.
The SRF can affect the inductor's performance and potentially cause oscillations. To mitigate this, use a series resistor or a damping network to reduce the Q factor and prevent resonance. You can also use a different inductor with a higher SRF or a lower Q factor.
The CRM2010-JW-4R7ELF has a maximum operating temperature of 125°C. Ensure good airflow, use a heat sink if necessary, and follow the recommended derating curves to prevent overheating. Also, consider the inductor's thermal resistance and maximum power rating to ensure reliable operation.
Trust Checks
This model has been verified by system checks.
System Verified
Sponsored
CRM2010-JW-4R7ELF Overview
Use the download button to access the CRM2010-JW-4R7ELF schematic symbol, PCB footprint, and 3D model.
To find more CAD model downloads similar to this part, try a partial part number search, like CRM20,
or try a keyword search, such as Metal Glaze/Thick Film Resistors
