The recommended land pattern for the CSRN2010FKR620 is a rectangular pad with a minimum size of 1.5 mm x 3.5 mm, with a non-solder mask defined (NSMD) pad and a solder mask opening of 1.2 mm x 3.2 mm.
While the CSRN2010FKR620 is a general-purpose resistor, it's not optimized for high-frequency applications. For frequencies above 1 MHz, it's recommended to use a high-frequency resistor with a lower inductance and capacitance, such as the CSRF series from Stackpole.
The CSRN2010FKR620 meets the requirements of AEC-Q200, but it's essential to verify the specific requirements of the automotive application, including temperature range, vibration, and humidity. Additionally, ensure that the resistor is used within its specified power rating and operating conditions.
The CSRN2010FKR620 has a maximum operating temperature of 155°C. While it can withstand high temperatures, its power rating decreases with increasing temperature. For example, at 125°C, the power rating is derated to 0.5 W. Always check the derating curve in the datasheet for specific temperature ranges.
The CSRN2010FKR620 has a moisture sensitivity level (MSL) of 1, which means it can withstand normal humidity levels. However, for applications with high humidity or moisture, it's recommended to use a resistor with a higher MSL rating or apply additional protective measures, such as conformal coating.
Trust Checks
No trust score is available for this model.
Trust Score Unavailable
Sponsored
CSRN2010FKR620 Overview
Use the download button to access the CSRN2010FKR620 3D model. You can still request or build the schematic symbol and PCB footprint by using the respective build or request forms on this page.
To find more CAD model downloads similar to this part, try a partial part number search, like CSRN2,
or try a keyword search, such as Fixed Resistors
