Part Image

CWD2425 - CRYDOM

Description: SSR RELAY SPST-NO 25A 24-280V

Download CWD2425 Model
Schematic
symbols
Schematic symbol is unavailable for download
PCB
footprints
PCB footprint is unavailable for download
3D
models
3D model is unavailable for download
3D Models
CWD2425 - CRYDOM  - 3D model
click to zoom
Note! To download footprints and symbols, use the build and request forms below

Build

Launch Build Wizard
Build Wizard not available for this package category!

Request (48 hours)

CWD2425 Details

  • Manufacturer Part Number:

    CWD2425

  • Pbfree Code:

    Yes

  • Rohs Code:

    Yes

  • Part Life Cycle Code:

    Transferred

  • Package Description:

    ROHS COMPLIANT, PLASTIC PACKAGE-4

  • HTS Code:

    8541.40.95.00

  • Manufacturer:

    Crydom Inc

  • Additional Feature:

    UL RECOGNIZED, VDE APPROVED, ZERO VOLTAGE CROSSING

  • Control Current:

    0.006 A

  • Control Voltage:

    90 V

  • Input Type:

    AC

  • Isolation Voltage-Max:

    4000 V

  • JESD-609 Code:

    e3

  • Number of Elements:

    1

  • On-State Current-Max:

    25 A

  • Operating Temperature-Max:

    80 °C

  • Operating Temperature-Min:

    -40 °C

  • Optoelectronic Device Type:

    TRIGGER OUTPUT SSR

  • Output Circuit Type:

    SCR

  • Overall Height:

    33 mm

  • Overall Length:

    58.4 mm

  • Terminal Finish:

    Tin (Sn)

CWD2425 Frequently Asked Questions (FAQs)

  • A multi-layer PCB with a dedicated ground plane and thermal vias is recommended. Ensure a minimum of 1-inch clearance around the device for airflow and heat dissipation.
  • Use a voltage regulator and a current limiter in series with the device. Add a TVS diode for overvoltage protection and a fuse or PTC resettable fuse for overcurrent protection.
  • Use a pi-filter configuration with a common-mode choke, X-capacitors, and Y-capacitors to ensure EMI compliance. Consult the datasheet for specific component values.
  • Use a thermistor or thermocouple to monitor the device temperature. Implement a shutdown circuit that disconnects the input power when the temperature exceeds the recommended maximum operating temperature.
  • Use a reflow soldering profile with a peak temperature of 240°C (464°F) and a dwell time of 30-60 seconds. Ensure a controlled ramp-up and cool-down rate to prevent thermal shock.

Trust Checks

No trust score is available for this model.
Trust Score Unavailable
Sponsored

CWD2425 Overview

Use the download button to access the CWD2425 3D model. You can still request or build the schematic symbol and PCB footprint by using the respective build or request forms on this page.
To find more CAD model downloads similar to this part, try a partial part number search, like CWD24, or try a keyword search, such as Solid State Relays

Parts related to CWD2425

Showing 0 results

Select Package Category

Package Categories

Datasheet PDF Preview