ROHM recommends a thermal pad on the bottom of the package, connected to a large copper area on the PCB to dissipate heat efficiently. A minimum of 2oz copper thickness is recommended, and the thermal pad should be connected to a ground plane to reduce thermal resistance.
To ensure reliable operation in high-temperature environments, it's essential to follow proper thermal design and layout guidelines. Additionally, consider using a heat sink or thermal interface material to reduce the junction temperature. ROHM also recommends derating the device's power dissipation according to the ambient temperature.
Although the datasheet doesn't explicitly state the maximum allowed voltage on the input pins, ROHM recommends limiting the input voltage to the supply voltage (VCC) + 0.3V to prevent damage to the internal ESD protection diodes.
Yes, the DAN202K can be used in switching regulator applications. However, it's essential to ensure that the device is operated within its recommended operating conditions, and the switching frequency is limited to 100 kHz or less to prevent excessive power loss.
To prevent latch-up or damage, ROHM recommends powering up the DAN202K in the following sequence: VCC, then VIN, and finally the input signals. This sequence helps prevent unwanted current paths and ensures reliable operation.
Trust Checks
This model has been provided by community users.
Community Provided
This model has been verified by system checks.
System Verified
This model has been reviewed by community users.
Community Approved
Sponsored
DAN202K Overview
Use the download button to access the DAN202K schematic symbol, PCB footprint, and 3D model.
To find more CAD model downloads similar to this part, try a partial part number search, like DAN20,
or try a keyword search, such as Rectifier Diodes
